Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Acura Mdx model year.
Safety recall notices and repair campaigns registered for the 2018 Acura Mdx in Canada.
On certain vehicles, the suspension mounting points on the rear subframe could rust. As a result, rear suspension components could fail. This could lead to poor handling and a loss of vehicle control.
A loss of control could create the risk of a crash.
Honda will notify owners by mail and advise you to take your vehicle to a dealership to inspect and install a rear subframe reinforcement kit or replace the subframe, as necessary.
On certain vehicles, the weight sensor for the front passenger seat may not have been manufactured properly. As a result, the passenger-front airbag and knee airbag could deploy in a crash that doesn't require them to. Note: This recall is an expansion of Transport Canada recall no. 2024-059. If the weight sensor fails, the SRS warning light would turn on in the instrument panel.
An airbag system that doesn't work properly could increase the risk of injury in a crash.
The company will notify owners by mail and advise you to take your vehicle to a dealership to replace the passenger-front seat weight sensor.
On certain vehicles, the recall repairs completed by a Honda or Acura dealer during recall AL65/AL66 (Transport Canada recall no. 2019-159) may not have been effective. As a result, a second repair is required. On certain vehicles, water could enter the tail lamps on the tailgate and cause a short circuit. As a result, the fuse could blow and cause a complete loss of rear lighting. Note: This recall replaces recall AL65/AL66 (Transport Canada recall no. 2019-159). Vehicles that previously had a fuse harness installed under that recall do not require this repair.
A loss of rear lighting could make the vehicle less visible and increase the risk of a crash.
Acura will notify owners by mail and advise you to take your vehicle to a dealership to install a fuse harness. The dealer will also inspect and, if necessary, replace the tail lamps on the tailgate and repair the body dust sealer.
This recall is for low-pressure fuel pumps installed on certain vehicles or sold at dealerships as a replacement part. On certain vehicles, the low-pressure fuel pump could fail. If this happens, the engine may run rough or may not start and the check engine light may turn on. This could also result in a sudden loss of engine power while driving. Note: This recall replaces Transport Canada recall no. 2023-679. Vehicles that were repaired under that recall don't require this repair.
A sudden loss of engine power could increase the risk of a crash.
The company will notify owners by mail and advise you to take your vehicle to a dealership to replace the fuel pump motor.
This recall is for low-pressure fuel pumps installed on certain vehicles or sold at dealerships as a replacement part. On certain vehicles, the low-pressure fuel pump could fail. If this happens, the engine may run rough or may not start and the check engine light may turn on. This could also result in a sudden loss of engine power while driving. Note: This is an expansion of Transport Canada recall nos. 2020-236 and 2021-182.
A sudden loss of engine power could increase the risk of a crash.
The company will notify owners by mail and advise you to take your vehicle to a dealership to replace the fuel pump motor.
On certain vehicles equipped with a V6 engine, the connecting rod bearings could wear prematurely and become damaged. If this happens, the engine could make abnormal noises and a warning light may turn on. If you continue to drive the vehicle with these symptoms, the engine could fail.
An engine failure could cause a sudden loss of power and/or increase the risk of a vehicle fire. Both issues could increase the risk of a crash or injury.
Honda will notify owners by mail and advise you to take your vehicle to a dealership to inspect the engine. If damage is found, the dealer will replace the necessary parts.
On certain vehicles, the teeth on the timing belt may separate due to a manufacturing issue. This could result in an engine stall.
An engine stall could increase the risk of a crash.
The company will notify owners by mail and instruct them to take their vehicle to a dealer to inspect the lot number on the timing belt. If it is within the affected range, the belt will be replaced. Additionally, dealers will inspect the engine for internal damage.
On certain vehicles, water could enter the tail lamps located on the tailgate. This could cause the tail lamps not to work properly. This could also cause a fuse to blow, which could result in a complete loss of rear lighting.
A loss of rear lighting could make the vehicle less visible and increase the risk of a crash.
The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to inspect the tailgate lid lamps. If either lamp is not working, the dealer will replace both lamps and inspect/replace the fuse. If both tailgate lid lamps are working, the dealer will modify the lamps, and install updated gaskets and wiring.
Certain vehicles may fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 135 - Light Vehicle Brake Systems. A problem with the rear brake system may cause gas bubbles to form in the brake fluid. This could cause a soft brake pedal feel and a reduction in brake performance, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will bleed the rear brakes.
A failure of this component (brakes) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain vehicles equipped with power driver and passenger seats may fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 207 - Anchorage of Seats and CMVSS 210 – Seat Belt Anchorages. The front driver and/or passenger seats may have been assembled with improperly manufactured rivets to secure the seat slide rails to the forward seat feet. In the event of a crash, the rivets may break and allow the front seat(s) to separate from the seat feet, which would fail to meet the requirements of the standard(s), and could increase the risk of injury to the seated occupant. Correction: For Pilot models, dealers will replace the “H” frame (seat rail assembly), on both front seats, and for affected MDX models, dealers will replace the driver’s seat frame assembly.
A failure of this component (seats and restraints) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.