Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Audi Q5 model year.
Safety recall notices and repair campaigns registered for the 2009 Audi Q5 in Canada.
Certain vehicles with a cracked (but not leaking) fuel pump flange were repaired with butyl tape only under a previous recall (please see Transport Canada Recall 2016-443 / Audi campaign 20W9). This is because replacement fuel pump flanges were not available at the time of repair (the butyl tape was used an interim repair). If the fuel pump flange is not replaced, a fuel leak could still occur. A fuel leak, in the presence of an ignition source, could lead to a fire causing injury and/or damage to property. Correction: Dealers will replace fuel pump flange and reapply the protective butyl tape.
A failure of this component (fuel system) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the driver frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the driver frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Additional Note: For the Audi A4, S4, A5 and S5 models, this campaign only affects the Cabriolet versions of these models. Also to Note: This recall supersedes the Audi brand vehicles subject to recall 2016-064 (Audi Recall 69N1) and 2016-065 (69N2). Audi brand vehicles completed under the previous 2016-064 and 2016-065 recalls require repair under this recall, as the previous recall remedy was an interim repair. Interim repair parts must be replaced with final repair parts.
A failure of this component (airbag) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the fuel pump flange may develop fine cracks or fissures, which could result in a fuel leak. Leaking fuel, in the presence of an ignition source, could lead to a fire causing injury and/or damage to property. Correction: Dealers will apply a butyl protective film to the fuel pump flange. If cracks are present, the fuel pump flange will be replaced.
A failure of this component (fuel system) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, a power supply component within the airbag control unit may corrode and cause the unit to fail. If the airbag control unit were to fail, the airbag light would illuminate in the vehicle’s instrument panel, and safety systems such as seat belt pretensioners and airbags could be affected and may not deploy in the event of a crash (where deployment is warranted), which could increase the risk of injury to vehicle occupants. Correction: Dealers will replace the affected airbag control module.
A failure of this component (airbag) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the front driver airbag inflator. Note: This campaign only affects the Audi A5 and Audi S5 Cabriolet models.
A failure of this component (airbag) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, a left and/or right A-Pillar trim cover clip may not have been manufactured correctly. This may allow the trim to come loose in a crash where the head protection airbags would deploy. If this happens, it could increase the risk personal injury or death. Correction: Dealers will replace the clips in the middle A-pillar covers.
A failure of this component (other) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.