CANADA Transport Canada Safety Recalls
EN FR
auto-recalls.ca

Canadian Safety Recalls Database

Home / Autocar / Wx / 2008 Autocar Wx
5 Active Safety Recalls

2008 Autocar Wx Recall

Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.

5
Safety Recalls
CMVSS
Safety Standard
Transport Canada
Official Source
VIN Decoder

VIN Decoder

Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.

Active Safety Recalls (5)

Safety recall notices and repair campaigns registered for the 2008 Autocar Wx in Canada.

Ref #2010-055 Campaign : A-1001
2010-03-01 125 units

Structure

Issue Description

Certain vehicles may develop cracks in the top flange of the front frame rail extension. Over time, the crack may propagate across the extension bracket, potentially causing the extension bracket to deform under load. This may compromise vehicle control, which may result in a crash causing property damage, personal injury or death. Correction: Dealers will reinforce the front frame extensions.

Safety Risk

A failure of this component (structure) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

View government recall bulletin Free parts & labor under Motor Vehicle Safety Act
Ref #2009-063 Campaign : A-0901
2009-02-27 39 units

Brakes

Issue Description

On certain vehicles, a leak in one or both Quick Release Valves (QRV) could occur. The first QRV is located in the lift axle air lines. A leak in that QRV would affect the rate at which the tag/pusher axle is lowered/lifted. A catastrophic failure of the QRV would result in a rapid drop of a raised tag axle, which could cause serious injury or death to a person working under or near the axle. The second QRV is in the park brake air lines. A leak would release pressure on the park brake springs; if the leak is large enough, the pressure would drop and set the brakes on the rear axle, which could result in a loss of vehicle control and a crash, causing property damage, personal injury or death. Correction: Dealers will inspect and, if necessary, replace the quick release valves.

Safety Risk

A failure of this component (brakes) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

View government recall bulletin Free parts & labor under Motor Vehicle Safety Act
Ref #2008-451 Campaign : A-0805
2008-12-19 6 units

Steering

Issue Description

On certain vehicles, the lower steering shaft pinch bolt may not have received adequate tightening torque during vehicle assembly. As a result, the steering shaft may separate from the steering gear. This could cause a sudden loss of steering control, resulting in a vehicle crash causing personal injury or death. Correction: Dealers will tighten the steering shaft pinch bolt.

Safety Risk

A failure of this component (steering) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

View government recall bulletin Free parts & labor under Motor Vehicle Safety Act
Ref #2007-355 Campaign : A-0704
2007-11-06 7 units

Label

Issue Description

On certain trucks, the certification label does not contain the correct Gross Vehicle Weight Rating (GVWR). The label may indicate that the vehicle's load capacity is higher than the designed weight rating. As a result, the vehicle could be overloaded without the operator's knowledge. A vehicle in an overloaded condition may be susceptible to component failure that may result in loss of vehicle control, increasing the risk of a crash. Correction: Dealers will install updated labels.

Safety Risk

A failure of this component (label) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

View government recall bulletin Free parts & labor under Motor Vehicle Safety Act
Ref #2007-237 Campaign : A-0702
2007-07-16 2 units

Brakes

Issue Description

On certain vehicles, the internal rubber check valve inside the Bendix SR-7 spring brake modulating valve can become deformed over time. The effect of this defect is intermittent and presents a potential delay or failure in applying the parking brakes; potentially resulting in a vehicle roll away. Should this occur, the unattended roll away vehicle could strike a bystander or cause property damage. Correction: Dealers will install a check valve repair kit.

Safety Risk

A failure of this component (brakes) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

View government recall bulletin Free parts & labor under Motor Vehicle Safety Act
Vehicle Profile & Safety Standards

Vehicle Specifications & Compliance Benchmark

Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.

Safety Recall Coverage
5 bulletins
Transport Canada safety defect records
Safety Compliance
CMVSS / NSVAC
Motor Vehicle Safety Act standards
NRCan EnerGuide
Trim-Specific
Varies by engine, drive & transmission
VIN Specifications
14 Attributes
Decode exact engine & plant via VIN above

All Autocar Wx Model Years

Explore safety recall records by model year.

View Model Overview