Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another BMW 1 Series model year.
Safety recall notices and repair campaigns registered for the 2008 BMW 1 Series in Canada.
On certain vehicles equipped with an N52 or N52K 6-cylinder engine, a manufacturing problem could cause the PCV valve heater (blow-by heater) to short circuit and overheat. Note: This replaces Transport Canada recalls 2017-470 and 2019-170. Only vehicles equipped with an N52 or N52K engine require this repair.
An overheated engine PCV valve heater could create the risk of a fire, even while the vehicle is parked and turned off.
BMW will notify owners by mail and instruct you to take your vehicle to a dealer to install a wire harness repair kit. BMW recommends that you should park your vehicle outdoors until the recall repairs have been completed.
On certain vehicles, the connector for the blower motor regulator may corrode. If this happens, the wiring could overheat and melt. Potential warnings include a blower motor that does not work, a burning smell, or smoke in the cabin.
Wiring that overheats could create a risk of a fire.
BMW will notify owners by mail and instruct them to take their vehicle to a dealer to replace the blower regulator wiring harness. Other components will be inspected for damage, and replaced as necessary.
On certain vehicles equipped with the N52 6-cylinder engine, an electrical short could occur in the PCV valve heater due to manufacturing irregularities. If this occurs, the surrounding plastics could overheat, melt and potentially cause a fire, which could increase the risk of injury and/or damage to property. Correction: Dealers will replace the PCV valve heater.
A failure of this component (engine) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the front driver air bag inflator or air bag module, depending on the vehicle model.
A failure of this component (airbag) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the positive battery cable connection to the fuse box could fail while the vehicle is being driven. This could interrupt the vehicle’s electrical system, resulting in engine stalling, loss of vehicle propulsion and a loss of function of various vehicle systems, such as lights. A loss of vehicle propulsion and electrical vehicle systems, in conjunction with traffic and road conditions, and the driver’s reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the positive battery cable connector with an updated version.
A failure of this component (electrical) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the sound insulation in the "B" pillar (around the seatbelt pre-tensioner) may ignite during a crash severe enough to deploy the pre-tensioner. This could result in additional property damage and/or personal injury. Correction: Dealers will replace the front upper seatbelt and repair the "B" pillar sound insulation on both driver and passenger sides.
A failure of this component (seats and restraints) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, incorrect crimp connectors may have been used during vehicle assembly on the side airbag and belt tensioner wiring. As a result, sufficient contact between the crimp connectors and the corresponding plug may not occur. As such, the airbag and/or seatbelt tensioner may not deploy during a vehicle crash where deployment would be warranted, which could increase the risk of personal injury or death to front seat occupants. Correction: Dealers will inspect and, if necessary, repair the wiring harness for the front side airbags and seatbelt tensioners.
A failure of this component (airbag) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.