Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another BMW R1100s model year.
Safety recall notices and repair campaigns registered for the 1999 BMW R1100s in Canada.
Certain motorcycles may experience chafing of the fuel hose against the rigid fuel feed and return lines leading from the fuel distributor. This could result in fuel leakage. Correction: Dealers will replace the right side flexible fuel hose.
A failure of this component (fuel system) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the left and right high-mounted handlebars are positioned on top of the upper fork clamp and are clamped to the top of each upper fork tube. Unfavorable tolerances may exist between a positioning tab on the handlebar mounting bracket and the gap in the upper fork clamp into which the tab fits. As a result, the specified torque value of the upper fork clamp screw and, therefore, maximum clamping force on the upper fork tube may not have been achieved. This could cause the handlebars to rotate forward under certain driving conditions, possibly resulting in a vehicle crash. Correction: Clamping connection parts will be degreased, positioning tab will be reworked if necessary to fit properly in the gap in the upper fork clamp and the clamping connection torque will be reset.
A failure of this component (steering) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, incorrect thread locking material applied during assembly could cause the rear brake linkage ball end, which is screwed into the rear brake lever, to loosen and eventually detach during vehicle operation. If this should occur, the rear brake could no longer be applied. Correction: Brake linkage ball end will be removed from the brake lever and reinstalled with a different thread locking compound, to prevent the ball end from loosening.
A failure of this component (brakes) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, an engine backfire during the starting process could cause either throttle body to loosen in its mount. If this happens, the fuel line leading to the right-hand fuel injector or the injector itself may be damaged or the line and injector may separate from each other. If this were to occur, fuel could be expelled from the line. Correction: Fuel distribution unit will be replaced with a unit incorporating a flexible right-hand fuel hose. In addition, the connection between the right-hand throttle body and the air inlet tube will be secured with two screws to prevent damage to the hose or injector should a backfire occur.
A failure of this component (fuel system) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.