CANADA Transport Canada Safety Recalls
EN FR
auto-recalls.ca

Canadian Safety Recalls Database

Home / BMW / X5 / 2000 BMW X5
5 Active Safety Recalls

2000 BMW X5 Recall

Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.

5
Safety Recalls
CMVSS
Safety Standard
Transport Canada
Official Source
VIN Decoder

VIN Decoder

Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.

Active Safety Recalls (5)

Safety recall notices and repair campaigns registered for the 2000 BMW X5 in Canada.

Ref #2025-602 Campaign : 32 81 25RC
2025-10-31 637 units

Airbag

Issue Description

This recall applies to vehicles that may be equipped with a replacement sport steering wheel that has a Takata airbag. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.

Safety Risk

If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.

Corrective Action & Repair

To reduce the safety risk, BMW advises you not to drive the vehicle until the recall repairs have been completed. BMW will notify owners by mail and advise you to contact a dealership to arrange for an inspection and, if necessary, replacement of the driver-front airbag module. To learn if your vehicle is affected by this recall, owners may: • Visit https://www.bmw.ca/en/ssl/VehicleRecall.html • Contact your preferred or local BMW Retailer • Call BMW Customer Relations Recall Services at 1-855-217-3002

View government recall bulletin Free parts & labor under Motor Vehicle Safety Act
Ref #2012-129 Campaign : N/D
2012-04-12 67 771 units

Label

Issue Description

Certain vehicles fail to conform to Canada Motor Vehicle Safety Standards. Specifically, the compliance label does not indicate the wheel rim size, as required by the Standard. Correction: Due to the inconsequential nature of this non-compliance, no action will be taken.

Safety Risk

A failure of this component (label) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

View government recall bulletin Free parts & labor under Motor Vehicle Safety Act
Ref #2003-001 Campaign : RC2003-001
2003-01-08 6 156 units

Brakes

Issue Description

On certain vehicles, the grommet holding the brake line to the front struts may slip out of its bracket. Consequently, the brake hose attached to the brake line may come in contact with the tire and be subject to wear and abrasion. This could cause some brake fluid leakage which would eventually illuminate the brake warning indicator light. If a loss of front brake performance occurs, the rear brake circuit will still be functional, and will be able to slow and stop the vehicle. Correction: Dealer will install an additional retaining clip in order to further secure the line and grommet to the strut.

Safety Risk

A failure of this component (brakes) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

View government recall bulletin Free parts & labor under Motor Vehicle Safety Act
Ref #2002-138 Campaign : RC2002-138
2002-07-22 2 638 units

Brakes

Issue Description

On certain passenger vehicles the brake pedal arm pivot shaft could loosen from its support bracket. Eventually, the brake pedal arm could detach from the bracket, rendering the braking system ineffective, increasing the risk of a crash. Correction: Dealers will check the brake pedal arm pivot shaft for proper seating in its support bracket. In addition, a pin will be installed to secure the shaft to the bracket.

Safety Risk

A failure of this component (brakes) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

View government recall bulletin Free parts & labor under Motor Vehicle Safety Act
Ref #2000-064 Campaign : 32 50 99RC
2000-03-09 25 units

Steering

Issue Description

On certain vehicles, the plastic collar which fits over the lower steering rack input shaft may not have been pushed down fully onto the rack at the assembly plant. As a result, there can be substantially more clearance between the steering rack and the collar than the design clearance. This could eventually result in the input shaft separating from the rack with subsequent loss of steering capability. Correction: Steering rack input shaft collar will be inspected for proper positioning and repositioned if necessary.

Safety Risk

A failure of this component (steering) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

View government recall bulletin Free parts & labor under Motor Vehicle Safety Act
Vehicle Profile & Safety Standards

Vehicle Specifications & Compliance Benchmark

Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.

Safety Recall Coverage
5 bulletins
Transport Canada safety defect records
Safety Compliance
CMVSS / NSVAC
Motor Vehicle Safety Act standards
NRCan EnerGuide
Trim-Specific
Varies by engine, drive & transmission
VIN Specifications
14 Attributes
Decode exact engine & plant via VIN above

All BMW X5 Model Years

Explore safety recall records by model year.

View Model Overview