Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Cadillac Srx model year.
Safety recall notices and repair campaigns registered for the 2006 Cadillac Srx in Canada.
On certain vehicles, there is a risk that some drivers may bump the ignition key with their knee and unintentionally move the key from out of the "run" position. If this were to occur, engine power, power braking and power steering would be affected, which would unexpectedly increase steering and brake pedal effort, potentially increasing stopping distances and the risk of a crash causing injury and/or damage to property. The timing of the key movement out of the "run" position, relative to the activation of the sensing algorithm of the crash event, may also result in the airbags not deploying in a subsequent collision, increasing the risk of injury. Correction: Dealers are to remove the key blade from the original flip key/transmitter assemblies provided with the vehicle, and provide two new keys and two key rings for every original key. Important note: Until the correction is performed, drivers should adjust their seat and steering column to allow clearance between their knee and the ignition key.
A failure of this component (electrical) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the drive axle differential seal may leak (note that all-wheel drive vehicles have two seals). Reduced lubrication may cause the differential to become noisier. Continued use may cause damage to bearings and other differential components. Three conditions could occur: 1). When the vehicle is stopped and shifted to reverse, the differential may jam and prevent vehicle movement. 2). the damage can cause drag that will feel like the parking brake is applied; or 3) the differential could jam and lock the drive wheels while the vehicle is underway. Should the latter occur, it could result in a loss of vehicle control and a crash, causing injury or death. Correction: Dealers will replace the drive axle differential seal(s).
A failure of this component (powertrain) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain vehicles fail to comply with the requirements of CMVSS 120 - Tire rim designation. These vehicles have an incomplete tire rim designation indicated on the compliance label. If a customer replaces a wheel with one that has a rim contour that is inappropriate for use with the tires on the vehicle, the mounting of the tire to the wheel and/or the tire/wheel assembly may not perform as designed/intended. In addition, certain vehicles are also missing the tire load rating on the label. If a tire of a lesser load rating than the original tire is installed, the tire may not be able to sustain the loads encountered during use. Correction: Dealers will install a new partial label over the existing label. Corrected labels and application instructions will be mailed to customers. Dealers will receive labels for installation on the vehicles in inventory.
A failure of this component (wheels) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.