Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Ford Bronco Sport model year.
Safety recall notices and repair campaigns registered for the 2024 Ford Bronco Sport in Canada.
On certain vehicles, the front lower ball joint(s) may not have been installed correctly on the steering knuckle(s). As a result, the front lower ball joint(s) could separate and cause a loss of steering control.
A loss of steering control could create a risk of a crash.
To reduce the safety risk Ford advises you not to drive your vehicle until the recall repairs are completed. Ford will notify owners by mail and advise you to contact a dealer to arrange for an inspection. The dealer will repair the front steering knuckle(s), as necessary.
On certain vehicles, the engine block heater could leak coolant. If this happens, the block heater could short circuit when it's plugged in. Note: This recall replaces Transport Canada recall no. 2025-554. Vehicles that were repaired under that recall don't require this repair.
A short circuit can create the risk of a fire.
To reduce the safety risk, Ford advises you not to use the engine block heater until the recall repairs have been completed. Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the block heater. Alternatively, owners can choose to have the dealership permanently disable the engine block heater.
On one vehicle, the recall repairs completed by a Ford dealer during recall 25S26 (Transport Canada recall no. 2025-139) may not have been done correctly. As a result, another repair is required. On certain vehicles, the powertrain control module (PCM) and body control module (BCM) may not detect a change in the charge level of the 12 V battery. As a result, the engine could stall. This could also cause the engine not to restart after a start-stop event and the hazard lights may not work.
A sudden loss of power to the wheels or a vehicle that doesn't restart after a start-stop event could increase the risk of a crash. Additionally, hazard lamps that don't work could make the vehicle less visible and increase the risk of a crash.
Ford will notify the owner by mail and advise them to take their vehicle to a dealership to update the PCM and BCM software.
On certain vehicles, the engine block heater could leak coolant. If this happens, the block heater could short circuit when it's plugged in.
A short circuit can create the risk of a fire.
To reduce the safety risk, Ford advises you not to use the engine block heater until the recall repairs have been completed. Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the block heater.
On certain vehicles, a fuel injector may crack. If this happens, fuel could leak into the engine compartment. Note: This recall only affects vehicles equipped with a 1.5 L EcoBoost engine. This recall replaces Transport Canada recalls 2022-658, 2024-160 and 2025-134.
A fuel leak can create the risk of a fire.
Ford will notify owners by mail. As an interim repair, a dealer will update the engine control software to detect fuel injector leaks. Owners that have already received this software update will be informed that the interim repair is not required. Once the final repair is available, Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the high-pressure fuel rail assembly, high-pressure fuel injectors, and update the engine control software.
On certain vehicles, a software problem could cause the rearview camera image not to display when the transmission is shifted into reverse. Canadian regulations require the rearview image to display when the vehicle is reversing.
A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the SYNC software.
On certain vehicles, the recall repairs completed by a Ford dealer during recall 24S24 (Transport Canada recall no. 2024-224) may not have been done correctly. As a result, a second repair is required. On certain vehicles, the powertrain control module (PCM) and body control module (BCM) may not detect a change in the charge level of the 12 V battery. As a result, the engine could stall. This could also cause the engine not to restart after a start-stop event and the hazard lights may not work.
A sudden loss of power to the wheels or a vehicle that doesn't restart after a start-stop event could increase the risk of a crash. Additionally, hazard lamps that don't work could make the vehicle less visible and increase the risk of a crash.
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the PCM and BCM software.
On certain vehicles, the recall repairs completed by a Ford dealer during recall 24S24 (Transport Canada recall no. 2024-224) may not have been done correctly. As a result, a second repair is required. On these affected vehicles, the powertrain control module (PCM) and body control module (BCM) may not detect a change in the charge level of the 12 V battery. As a result, the engine could stall. This could also cause the engine not to restart after a start-stop event and the hazard lights may not work.
A sudden loss of power to the wheels or a vehicle that doesn't restart after a start-stop event could increase the risk of a crash. Additionally, hazard lamps that don't work could make the vehicle less visible and increase the risk of a crash.
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the PCM and BCM software.
On certain vehicles, the powertrain control module (PCM) and body control module (BCM) may not detect a change in the charge level of the 12 V battery. As a result, the engine could stall. This could also cause the engine not to restart after a start-stop event and the hazard lights may not work.
A sudden loss of power to the wheels or a vehicle that doesn't restart after a start-stop event could increase the risk of a crash. Additionally, hazard lamps that don't work could make the vehicle less visible and increase the risk of a crash.
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the PCM and BCM software.
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.