2010 Ford Edge Recall

On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.

If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.

Ford will notify owners by mail. The corrective actions for this recall are under development. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.

On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.

If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.

Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag inflator replaced. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected. Additional note: This recall supersedes recalls 2016-347 (Ford Safety Improvement Program 16S26), 2017-024 (Ford Recall 17S01) and 2018-035 (Ford Recall 18S01). Vehicles repaired under the previous recalls do not require repair under this recall.

Certain ACDelco Advantage wheel hub spindles, manufactured by Bearing Technologies Ltd., contain a defect which may affect vehicle safety. The spindles have studs with oversized protruding shoulders that may make assembling the part difficult with certain aftermarket brake rotors (original equipment rotors are not affected). If this difficulty in assembly is not heeded, the defect may cause a vibration of the vehicle or wobbling of the wheel on which the hub is installed. If a driver does not stop the vehicle, this may lead to a loss of vehicle control. Affected parts are ACDelco Advantage wheel hub spindles, Part No. 19360602 (BR930676K), sold between November 21, 2016 and October 2, 2017. Parts manufactured with these studs have any of the following LOT codes etched on the face of the spindle: FH38, FJ38, FN38, FP38, FS38, FV38, FY38, FZ38, and HC38. These parts fit exclusively on the models listed in this notice. Correction: Bearing Tech will provide customers with a replacement ACDelco Advantage wheel spindle, Part No. 19385577 (518517). Owners should contact Bearing Tech at 800-677-3477 or send an email to recall@brgtec.com Note: This campaign is not being conducted under the requirements of the Motor Vehicle Safety Act.

A failure of this component (other) may increase the risk of a crash or injury.

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Ford Canada is conducting a voluntary Safety Improvement Program involving passenger airbag inflators in certain vehicles that were originally sold or ever registered in certain high humidity areas of the United States equipped with Takata airbags. Ford will replace the driver or passenger inflator on affected vehicles, depending on the vehicle involved. Owners who believe their vehicles may have been originally purchased or registered in the states of New Jersey, Delaware, District of Columbia, Maryland, Pennsylvania, Ohio, Indiana, Illinois, Virginia, West Virginia, Kentucky, Missouri, Nebraska, Kansas, Oklahoma, Arkansas, Tennessee, North Carolina, Nevada, Arizona, New Mexico, California, Texas, Louisiana, Mississippi, Alabama, Georgia, South Carolina, Florida, Hawaii, Puerto Rico or the U.S. Virgin Islands should contact a Ford dealer. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Note: This Safety Improvement Program is superseded by recall 2019005 (Ford Recall 19S01). Please see recall 2019005 for more information.

A failure of this component (airbag) may increase the risk of a crash or injury.

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

On certain vehicles registered and operated in areas where road salt is used on the roadways during winter months for extended time periods (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland-Labrador), corrosion may occur underneath the fuel tank mounting reinforcement brackets at the weld seam. This could result in a small hole to form in the fuel tank resulting in a fuel vapour leak or fuel leak. A malfunction indicator lamp (MIL) may illuminate, and/or fuel odour or liquid fuel may be observed. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or property damage. Correction: Dealers will inspect, and if necessary, repair or replace the fuel tank. Note: This recall is an expansion of recall 2014-482.

A failure of this component (fuel system) may increase the risk of a crash or injury.

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).