Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Ford Focus model year.
Safety recall notices and repair campaigns registered for the 2012 Ford Focus in Canada.
On certain vehicles the recall repairs completed by a Ford dealer during recall 18S32 (Transport Canada recall no. 2018-577) may not have been done correctly. As a result, a another repair is required. On certain vehicles, the canister purge valve (CPV) may stick open and cause the fuel tank to deform. If this happens, the fuel gauge could read incorrectly and there could be a loss of power to the wheels. Note: This recall is an expansion of Transport Canada recall no. 2018-577. Vehicles repaired under that recall also require this repair.
A sudden loss of power to the wheels could increase the risk of a crash.
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the powertrain control module (PCM) software and, if necessary, replace the CPV. If the CPV is replaced, the dealer will inspect and replace the carbon canister, fuel tank and fuel delivery module, as necessary. In the interim, owners are advised to maintain at least 1/2 tank of fuel until the recall repair is performed.
This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act.
Glass that breaks in to large pieces could create a risk of injury.
The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
On certain vehicles repaired under recall 2018-577 (Ford Recall #18S32), the software for the Powertrain Control Module (PCM) was not properly updated. As a result, a second repair is required. The software allows the PCM to detect a Canister Purge Valve (CPV) that is not working properly. A CPV that is not working properly could cause a malfunction indicator light (MIL) to turn on in the instrument cluster, erratic readings on the fuel gauge, and/or the engine may stall. Note: Owners are advised to keep their fuel level above half-full until the recall repairs are completed.
A sudden loss of engine power could increase the risk of a crash.
Ford will notify owners by mail and instruct them to take their vehicle to a dealer to update the Powertrain Control Module (PCM) software.
On certain vehicles, the Canister Purge Valve (CPV) may stick open and cause excessive vacuum in the fuel system that could deform the fuel tank. If this were to occur, it could cause: a malfunction indicator light (MIL) to illuminate, erratic readings on the fuel gauge, and/or the engine may stall. This could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will reprogram the Powertrain Control Module (PCM) with new software and replace the CPV as necessary. If the CPV is replaced, dealers will inspect and replace the carbon canister, fuel tank and fuel delivery module as necessary. Note: In the interim, owners are advised to maintain at least 1/2 tank of fuel until the recall repair is performed.
A failure of this component (fuel system) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain plug-in hybrid and electric vehicles were supplied with a 120V convenience charge cord that may be susceptible to overheating if there is a poor connection at the electrical outlet. This could result in increased cord temperatures, melting, and an increased risk of fire causing injury and/or damage to property. Correction: Dealers will replace the factory supplied 120V convenience cord with the latest version of the cord that includes thermal protection.
A failure of this component (electrical) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the pawl spring tab in the side door latch could break. This condition typically will prevent the door from latching. In certain situations where the door is able to be closed, the door may be partially latched and could unlatch while driving. This could increase the risk of injury to a vehicle occupant seated next to the door, or result in damage to property. Correction: If a door will not latch, dealers will replace all four door latches with a more robust part. Note: A door that is partially latched can cause the courtesy light to remain on, set a door ajar message in the instrument cluster and sound a door ajar chime to alert the driver that there is a door latch problem.
A failure of this component (structure) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain Focus Electric vehicles may experience a sudden loss of motive power while driving, which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will reprogram the powertrain control module. Note: If this condition occurs, a red triangle and "stop safely now" message will be displayed in the instrument cluster. Power steering and brakes will continue to operate normally and the vehicle can often be restarted after going through a shutdown process.
A failure of this component (powertrain) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standard 114 - Theft Protection and Rollaway Prevention. No audible chime is provided when the door is opened and the electronic key code remains in the ignition. This could increase the risk of injury and/or damage to property. Correction: Dealers will update vehicle software.
A failure of this component (electrical) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain vehicles equipped with high-intensity discharge (HID) headlamps may not comply with Canada Motor Vehicle Safety Standard 108 - Lighting System and Retroreflective Devices. The front side marker lights may be inoperative and the daytime running lamp (DRL) operation telltale may not illuminate as required by the standard. These issues could render the vehicle less visible to other road users, which could increase the risk of a crash causing injury and/or property damage. Correction: Dealers will replace the headlamp assemblies and reconfigure the DRL system.
A failure of this component (lights and instruments) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, a seal plug may have been dislodged from the wiring harness connector to the passenger side wiper motor during vehicle assembly. This could allow water or other contaminants to enter and accumulate in the connector, resulting in an intermittent or inoperative passenger side wiper motor. An inoperative passenger side wiper may result in reduced driver visibility in certain driving manoeuvres, which could result in a crash causing property damage and/or personal injury. Note: The driver side wiper uses a separate motor that does not use a seal plug within the connector and is not susceptible to this condition. Correction: Dealers will inspect, clean and properly seal the passenger side wiper motor connector. Inoperative wiper motors will be replaced.
A failure of this component (visual system) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.