2016 Ford Fusion Recall

On certain vehicles, the front brake hoses could fail and cause a progressive brake fluid leak. If this happens, the driver may experience a change in brake pedal feel and travel. This can cause reduced braking. Note: A brake fluid leak would cause the brake warning light to turn on. This recall doesn't affect models with a Hybrid engine. Vehicles repaired under Ford warranty extension program 22N02 already have updated brake hoses, and don't require this repair.

Reduced braking can cause an extended stopping distance and increase the risk of a crash.

Ford will notify owners by mail and instruct you to take your vehicle to a dealership to replace the front brake hoses.

On certain vehicles, the shift cable may detach from the transmission. This could cause the transmission not to shift gears when the shifter is moved. As a result, the transmission could be in a different gear than the gear shifter indicates. If a driver attempts to exit the vehicle while the transmission is not in Park, and the parking brake is not applied, the vehicle could move suddenly.

Sudden and unexpected movement of the vehicle could increase the risk of a crash.

Ford will notify owners by mail and instruct you to take your vehicle to a dealership to replace the transmission shifter cable bushing and install a protective service cap. Ford advises that you should apply the parking brake each time the vehicle is parked.

On certain vehicles, the bolts that attach the electric power steering assist motor to the steering gear may corrode and break. This could cause a loss of power steering assist. This recall applies to vehicles originally sold or currently registered in areas of heavy road salt usage (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island, and Newfoundland & Labrador).

A loss of power steering assist may result in a sudden increase in steering effort, especially at low vehicle speeds. This could increase the risk of a crash.

The company will notify owners by mail and instruct you to take your vehicle to a Ford or Lincoln dealer to replace the bolts and apply a wax sealer. If one or more of the bolts are broken or missing, a new steering gear will be installed.

This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act.

Glass that breaks in to large pieces could create a risk of injury.

The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.

On certain cars equipped with a 2.5 litre engine, the shift cable may detach from the transmission. This could cause the transmission not to shift gears when the shifter is moved. As a result, the transmission could be in a different gear than the gear shifter indicates. If a driver attempts to exit the car while the transmission is not in Park, and the parking brake is not applied, the car could move suddenly.

Sudden and unexpected movement of the car could increase the risk of a crash.

Ford will notify owners by mail and instruct you to take your vehicle to a Ford or Lincoln dealer to replace the transmission shifter cable bushing and install a protective service cap. Ford advises that you should apply the parking brake each time the vehicle is parked.

On certain vehicles, the bushing that attaches the shift cable to the transmission may degrade over time and could detach. This could allow the transmission to be in a gear state different than the gear shift position selected by the driver. This condition could also allow the driver to move the shifter to Park and remove the ignition key while the transmission gear may not be in Park. If the parking brake is not applied, this could result in unintended vehicle movement, which would increase the risk of crash causing injury and/or damage to property. Correction: Dealers will replace the shifter cable bushing.

A failure of this component (powertrain) may increase the risk of a crash or injury.

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

On certain vehicles, the steering wheel bolt torque retention feature may not fully engage into the steering shaft. If the bolt loosens, the steering wheel may appear to be loose, which could affect vehicle control. If a loose bolt is left unrepaired, the steering wheel may detach from the steering column, which could result in a loss of steering control, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the steering wheel bolt with a longer bolt.

A failure of this component (steering) may increase the risk of a crash or injury.

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

On certain vehicles, deployment of the driver or front passenger seatbelt pretensioner in a crash may generate internal pretensioner temperatures that can degrade the tensile strength of the outboard seat belt anchor cable. This could result in the seat belt not adequately restraining the seat occupant in a crash, increasing the risk of injury and/or damage to property. Correction: Dealers will apply a coating to protect the pretensioner's cables.

A failure of this component (seats and restraints) may increase the risk of a crash or injury.

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard 301 – Fuel System Integrity. The affected vehicles may have a fuel tank that was not manufactured to specification and may cause the vehicle to fail to meet the requirements of the standard. Improperly manufactured fuel tanks have thin walls that may crack if the vehicle is involved in a crash, which could result in a fuel leak. Fuel leakage, in the presence of an ignition source, could result in a fire causing injury and/or property damage. Correction: Dealers will replace the fuel tank.

A failure of this component (fuel system) may increase the risk of a crash or injury.

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).