Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Freightliner Custom Chassis (fccc) B2 School Bus Chassis model year.
Safety recall notices and repair campaigns registered for the 2007 Freightliner Custom Chassis (fccc) B2 School Bus Chassis in Canada.
On certain buses, contacts in the pressure switch for the low current brake lamp signal to the chassis Electronic Control Unit (ECU) may become contaminated by the presence of silicone used during assembly. Over time insulating deposits may build up on the contacts and affect the operation of the brake lamp signal to the chassis ECU, thereby preventing brake lamp illumination. Failure to clearly indicate intentions to following motorists could result in a vehicle crash causing injuries or death. Correction: Dealers will replace the pressure switch "A" module in the Air Management Unit (AMU).
A failure of this component (other) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, incorrect spindle nuts may have been installed during vehicle assembly. This could cause incorrect end play, cone spin, excessive heat, degradation of lubrication, wear of the spindle nut and bearing journal, oil contamination with metal shavings, and premature bearing failure. Continued operation could lead to wheel separation, which could result in a vehicle crash. As well, this situation creates the risk that nearby bystanders or motorists be struck by a wayward wheel assembly. Either of these concerns could cause property damage, personal injury, or death. Correction: Dealers will affect repairs.
A failure of this component (steering) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the fasteners that attach the steering arm or tie rod arm to the spindle may have been over or under tightened during assembly process. Incorrectly torqued steering arm fasteners may fatigue and fracture, possibly causing a crash without warning. Correction: Dealers will inspect fasteners and apply correct tightening torque.
A failure of this component (steering) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the internal rubber check valve inside the Bendix SR-7 spring brake modulating valve can become deformed over time. The effect of this defect is intermittent and presents a potential delay or failure in applying the parking brakes; potentially resulting in a vehicle roll away. Should this occur, the unattended roll away vehicle could strike a bystander or cause property damage. Correction: Dealers will install a check valve repair kit.
A failure of this component (brakes) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, a manufacturing error with the double-check valve module used in controls for the park brake interlock on school bus chassis or in the optional M2 work brake may affect vehicle braking capabilities. On vehicles with park brake interlock controls, the double-check valve may release air from the service and parking brakes when service brake is applied. On vehicles with work brakes, the work brake may not hold depending on weight, slope and air leak rate, or the stop lamps may intermittently not come on when the service brake pedal is applied. Correction: Dealers will replace the double-check valve module.
A failure of this component (brakes) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain school buses, the upper steering shaft pinch bolt may not have been correctly tightened during vehicle assembly. If the bolt loosens and falls out, the driver may loose steering control which could result in a crash. Correction: Dealers will inspect and, if required, tighten the steering pinch bolts.
A failure of this component (steering) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.