Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Hyundai Elantra model year.
Safety recall notices and repair campaigns registered for the 2002 Hyundai Elantra in Canada.
On certain vehicles operated in areas of heavy road salt usage (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island, and Newfoundland & Labrador), road salt can collect in the outboard portion of the front lower control arm and may result in internal corrosion leading to thinning of the steel in the lower control arms. In severe cases, the corrosion may progress to the point where the lower control arm's upper and lower panels become perforated. A perforated front lower control arm may fracture between its ball joint attachment and the forward and rearward pivot attachments to the chassis. This could result in a loss of vehicle control and a crash causing property damage, personal injury or death. Correction: Dealers will inspect and, if necessary, replace the front lower control arms. Should the control arms not require replacement, drainage holes will be added, as well as treatment with rust-proofing material to arrest the corrosion process.
A failure of this component (suspension) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain non- ABS vehicles located in Quebec, Nova Scotia, New Brunswick, Prince Edward Island and Newfoundland, after sustained exposure to temperatures below -30 degrees Celsius, the power brake booster diaphragm may lose elasticity. After the first application following a sustained period of non-operation at temperatures below -30 degrees Celsius, the reduced elasticity of the diaphragm prevents the brake booster vacuum valve from fully closing. Therefore, the booster is unable to replenish vacuum and braking assist is reduced. The brakes operate, but require higher than normal brake pedal application effort, which may result in increased stopping distances. Normal brake booster operation returns as the brake booster diaphragm becomes warmer, approximately 10 minutes after the engine is started. Correction: Dealers will replace the brake booster assembly.
A failure of this component (brakes) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the fuel tank assembly valve may not close properly. If a vehicle with a fuel tank assembly valve that is not properly closed were to roll over, fuel spillage could occur. Fuel spillage in the presence of an ignition source may result in a fire. Correction: Dealer will install an additional fuel tank assembly valve.
A failure of this component (fuel system) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the rear brake tubes may contact the steering gear box mounting brackets resulting in rear brake tube wear and corrosion. Severe rear brake tube wear and corrosion may result in brake fluid leakage reducing braking capability. Correction: Dealer will reposition the rear brake tubes, install clips to control the position of the tubes and apply anti-corrosion material where contact with the steering gear box mounting brackets may have occurred.
A failure of this component (brakes) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.