CANADA Transport Canada Safety Recalls
EN FR
auto-recalls.ca

Canadian Safety Recalls Database

Home / Hyundai / Santa Fe / 2012 Hyundai Santa Fe
4 Active Safety Recalls

2012 Hyundai Santa Fe Recall

Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.

4
Safety Recalls
CMVSS
Safety Standard
Transport Canada
Official Source
VIN Decoder

VIN Decoder

Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.

Active Safety 2012 Hyundai Santa Fe Recalls (4)

Safety recall notices and repair campaigns registered for the 2012 Hyundai Santa Fe in Canada.

Ref #2024-552 Campaign : R0260
2024-09-23 824 695 units

Label

Issue Description

On certain vehicles, the compliance label may be missing information in French. The words listed on the label for "Tires", "Rims", "Front" and "Rear" appear in English only, when they should be listed as "Tires/Pneus", "Rims/Jantes", "Front/Avant" and "Rear/Arriere". Canadian regulations require this information to be listed on the label in both English and French.

Safety Risk

These small errors do not affect vehicle safety.

Corrective Action & Repair

This is not a recall. The company has corrected the compliance label for all new vehicles.

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2021-674 Campaign : R0204 (10D021)
2021-11-04 32 431 units

Engine

Issue Description

Hyundai Auto Canada is conducting a Product Improvement Campaign that provides an update to the engine control module to detect potential problems before an engine fails. An engine failure would cause a sudden loss of power with an inability to restart. Note: This only affects Santa Fe models equipped with a 2.4 L MPI engine, and Veloster models with a 1.6 L GDI engine.

Safety Risk

A sudden loss of engine power could increase the risk of an accident. An engine failure could also create the risk of a fire.

Corrective Action & Repair

Hyundai will notify owners by mail and advise you to take your vehicle to a dealer to update the software for the engine control module. Note: Hyundai recommends that you should always follow the correct vehicle maintenance schedule, which is printed in the Owner's Manual. If you experience unusual engine noise, reduced power, or a check engine/oil warning light, Hyundai advises you to immediately visit a Hyundai dealership to have your vehicle diagnosed.

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2020-592 Campaign : R0177
2020-12-02 14 549 units

Engine

Issue Description

On certain vehicles equipped with a 1.6 L GDI, 2.0 L GDI, or 2.4 L MPI engine, the connecting rod bearings could wear prematurely. As a result, there could be an abnormal knocking noise from the engine and/or the oil pressure warning light may turn on. If you continue to drive the vehicle with worn connecting rod bearings, the engine could fail. An engine failure would cause a sudden loss of power with an inability to restart. In some cases, a damaged connecting rod could puncture the engine block and cause an oil leak. Note: For the Sonata model, only the Sonata Hybrid and Plug-In Hybrid (PHEV) models are affected by this recall. Additional Note: Engine compartment fires can happen for many different reasons. In some cases, there is too much damage to find the cause of a fire.

Safety Risk

A sudden loss of engine power could increase the risk of a crash. Oil that leaks onto a hot component could cause a fire.

Corrective Action & Repair

Hyundai will notify owners by mail and instruct you to take your vehicle to a dealer for an engine inspection test, to determine if there is bearing damage. If damage is found, the engine will be replaced. Dealers will also update the software for the engine control module. Note: Hyundai recommends that you should always follow the correct vehicle maintenance schedule, which is printed in the Owner's Manual.

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2020-233 Campaign : R0171 (11CC01)
2020-05-27 3 838 units

Electrical

Issue Description

Certain vehicles may be equipped with an accessory trailer wiring harness kit that could fail. Over time, this could result in a short circuit that can cause overheating of the control module. Note: This recall only affects Hyundai Genuine Accessory trailer wiring harness kits that were manufactured by third parties and sold in Canada. These kits may have been ordered at the time of a vehicle purchase, or purchased separately from a dealer as an aftermarket accessory.

Safety Risk

A short circuit could create a fire risk. This risk remains even when the vehicle is parked.

Corrective Action & Repair

Hyundai will notify owners by mail and instruct you to inspect your vehicle to see if it has an affected trailer wiring harness installed. If it does, Hyundai will advise you to take your vehicle to a dealer to install a redesigned trailer wiring harness. Hyundai recommends that you should park your vehicle outdoors, and away from other vehicles or structures until the recall repairs have been completed.

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Vehicle Profile & Safety Standards

Vehicle Specifications & Compliance Benchmark

Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.

Safety Recall Coverage
4 bulletins
Transport Canada safety defect records
Safety Compliance
CMVSS / NSVAC
Motor Vehicle Safety Act standards
NRCan EnerGuide
Trim-Specific
Varies by engine, drive & transmission
VIN Specifications
14 Attributes
Decode exact engine & plant via VIN above

All Hyundai Santa Fe Model Years

Explore safety recall records by model year.

View Model Overview