Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Hyundai Santa Fe Sport model year.
Safety recall notices and repair campaigns registered for the 2016 Hyundai Santa Fe Sport in Canada.
On certain vehicles, the compliance label may be missing information in French. The words listed on the label for "Tires", "Rims", "Front" and "Rear" appear in English only, when they should be listed as "Tires/Pneus", "Rims/Jantes", "Front/Avant" and "Rear/Arriere". Canadian regulations require this information to be listed on the label in both English and French.
These small errors do not affect vehicle safety.
This is not a recall. The company has corrected the compliance label for all new vehicles.
On certain vehicles, the rear parking assist sensors (mounted in the rear bumper) could short circuit. Note: This recall replaces Transport Canada recall 2022-118. Vehicles that were already repaired under Hyundai recall R0212 don't require this repair.
A short circuit could create a fire risk.
Hyundai will notify owners by mail and instruct you to bring your vehicle to a dealership to replace the rear parking assist sensor fuse and any defective sensors. Hyundai recommends that if the instrument cluster does not work, the transmission shifter is stuck in park, or if you see melted plastic on the rear bumper, you should park the vehicle outside and contact a Hyundai dealer.
Certain vehicles may be equipped with an accessory trailer wiring harness kit that could fail. Over time, moisture could enter the control module and cause a short circuit. Note: This recall only affects Hyundai Genuine Accessory trailer wiring harness kits that were manufactured by third parties and sold in Canada. These kits may have been ordered at the time of a vehicle purchase, or purchased separately from a dealer as an aftermarket accessory.
A short circuit could create a fire risk. This risk remains even when the vehicle is parked.
Hyundai will notify owners by mail and instruct you to inspect your vehicle to see if it has an affected trailer wiring harness installed. If it does, Hyundai will advise you to take your vehicle to a dealer to install a redesigned trailer wiring harness. Hyundai recommends that you should park your vehicle outdoors, and away from other vehicles or structures until the recall repairs have been completed.
Hyundai Auto Canada is conducting a Product Improvement Campaign that provides an update to the engine control module to detect potential problems before an engine fails. An engine failure would cause a sudden loss of power with an inability to restart. Note: This affects Sonata and Santa Fe Sport equipped with a 2.4 L GDI or 2.0 L Turbo GDI engine, as well as Tucson equipped with a 2.4 L GDI engine.
A sudden loss of engine power could increase the risk of an accident.
The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to update the software for the engine control module. Note: Vehicles previously repaired under Product Improvement Campaign R0153 (TC # 2019-130) do not require this software update. Owners can find additional information at www.hyundaiengineinfo.ca.
This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act.
Glass that breaks in to large pieces could create a risk of injury.
The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
Hyundai Auto Canada is conducting a Product Improvement Campaign that provides an update to the engine control module to detect potential problems before an engine fails. An engine failure would cause a sudden loss of power with an inability to restart. Note: This affects Sonata and Santa Fe Sport equipped with a 2.4 L GDI or 2.0 L Turbo GDI engine, as well as Tucson equipped with a 2.4 L GDI engine.
A sudden loss of engine power could increase the risk of an accident.
The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to update the software for the engine control module. Note: Vehicles repaired under Service Campaigns, C0336, C0344, or C0347, already have this software update. Owners can find additional information at www.hyundaiengineinfo.ca.
When repairs were completed under recall campaign 2015-428 (Hyundai #R0101) or 2017197 (Hyundai #R0130), the high pressure fuel pipe may not have been properly installed on the fuel pump outlet. A fuel leak could occur if the pipe was damaged, misaligned or improperly torqued during the recall repair.
Leaking fuel in the presence of an ignition source could increase the risk of a fire causing injury and/or property damage.
The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer for an inspection. If fuel leakage is detected, the fuel pipe will be replaced with a new one.
On certain vehicles, the cable between the actuating lever for the secondary hood latch and the secondary latch may become corroded over time. This could cause the secondary hood latch to remain in the open position when the hood is closed. If the vehicle were to be driven with the primary hood latch disengaged, or primary hood latch is released while driving, the secondary hood latch may not hold the hood closed while the vehicle is in motion. If this were to occur, it could compromise the driver’s ability to see the road and its users, as well as cause damage to the windshield. These issues could result in a crash causing injury and/or property damage. Correction: Dealers will replace the secondary hood latch cable.
A failure of this component (structure) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 208 - Occupant Protection in Frontal Impacts. The wiring to the switch within the driver seat belt buckle which monitors whether the seat belt is buckled or unbuckled could become damaged by the seat's height adjuster mechanism. This could result in no audible signal (chime) or indicator light if the buckle is not fastened, or the chime and indicator light staying on when the seat belt is buckled. A lack of audible signal (chime) or indicator light may increase the likelihood of the vehicle being operated with an unfastened seat belt, which would increase the risk of injury in a crash. Correction: Dealers will inspect, and if necessary, reroute the harness to its proper location. Any harnesses with damage to the circuitry will be replaced.
A failure of this component (seats and restraints) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.