Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Infiniti Qx80 model year.
Safety recall notices and repair campaigns registered for the 2014 Infiniti Qx80 in Canada.
On certain vehicles, the compliance label may list the wrong gross axle weight rating (GAWR) information. This could lead you to overload the vehicle and cause poor handling or a tire failure. Note: This recall only affects models equipped with 22-inch wheels.
Poor handling or a tire failure could cause a loss of vehicle control and result in a crash.
The company will notify owners by mail and provide you with a new compliance label. If you'd like help to install it, you can contact a dealer to have it installed free of charge.
On certain vehicles, the fuel pressure sensor connected to the engine fuel delivery rail may not have been sufficiently tightened during vehicle assembly. Should the pressure sensor loosen, fuel could leak past a gasket used in the connection between the sensor and the rail. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will inspect the pressure sensor and tighten to specification. Note: This is an expansion of recall 2012-074. Vehicles that were repaired under the previous campaign are not affected because that remedy would have corrected the subject condition.
A failure of this component (fuel system) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the driver's (frontal) airbag inflator was built with an incorrect part which could cause the inflator to rupture during a deployment. In a crash, this may cause airbag components to separate, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. Correction: Dealers will replace the driver's (frontal) airbag.
A failure of this component (airbag) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standard 110 - Tire Selection and Rims. The compliance label may contain incorrect rear Gross Axle Weight Rating (GAWR) information, and may list the rim diameter as being 20" for vehicles equipped with 22" wheels. This could result in vehicle overloading and/or use of replacement tires of an incorrect size and load rating and could adversely affect vehicle handling, increasing the risk of a crash causing injury and/or damage to property. Correction: Owners will be supplied with a revised compliance label and installation instructions. Owners may also have the label installed by a dealer.
A failure of this component (label) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.