Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another International 9200i 6x4 model year.
Safety recall notices and repair campaigns registered for the 2004 International 9200i 6x4 in Canada.
On certain trucks, the positive battery cables, that supply power from the batteries to the starter, may rub against an electrical ground cable between the engine and the starter, and electrical ground cable between the frame rail and the starter, or the frame rail itself. This rubbing may cause an electrical short and/or fire, which can result in property damage, personal injury, or death. Correction: Dealers will re-route the battery cables using new bracketry.
A failure of this component (electrical) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the positive battery cable between the batteries and the starter may rub against an electrical ground cable between the starter and frame rail. This chafing may cause an electrical short and/or fire, which could result in property damage, personal injury or death. Correction: Dealers will inspect to determine appropriate level of remedy required.
A failure of this component (electrical) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the rear suspension transverse beam castings were not made to specifications. If a casting were to break when the vehicle is in motion, parts could become projectiles with potential to cause property damage, personal injury or death. Also, the transverse beam may drop down low enough to contact the road surface causing sparks that could ignite a fire. Correction: Dealers will inspect and, if necessary, replace the transverse beams.
A failure of this component (suspension) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, only 8 bolts were installed in the brake group during axle build up. The brake group, an assembly that includes the brake shoes, springs, air chambers, slack adjusters, and spider, is normally attached to an axle housing with 9 bolts. A failure of the brake group connection to the axle may result in a sudden loss of braking ability. Correction: Dealers will inspect and, if missing, install the 9th bolt and re-torque the entire assembly.
A failure of this component (brakes) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the front, non-drive axle, cotter keys and spindle nut retainers were not installed. The cotter keys and spindle nut retainers aid in wheel retention. If not installed, a front wheel could separate from the vehicle, which may result in property damage, personal injury or death. Correction: Dealers will inspect and, if missing, install new retainers and cotter keys.
A failure of this component (suspension) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the engine electrical harness can chafe against sharp edges on the engine. There are a number of different failures that could occur as many functions of the vehicle are processed through this harness. The modes of failure that could occur without warning, that may affect highway safety are: sudden acceleration, activation of engine compression brake, alternator overload and possible fire, engine speed dropping to idle, and loss of engine Electronic Control Module (ECM) power resulting in engine shutdown. Correction: Dealers will inspect, repair and relocate the engine harness.
A failure of this component (electrical) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, water intrusion into the sleeper berth's bunk control panel area may pool in the tops of the dome light, TV/VCR, and/or refrigerator power switches. The LED circuit boards in these switches may begin to heat up and possibly produce a flame or fire, without warning, that could cause property damage, personal injury, or death. Correction: Dealer will install a water shield over the back of the entire bunk control panel.
A failure of this component (electrical) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.