Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another International Prostar model year.
Safety recall notices and repair campaigns registered for the 2009 International Prostar in Canada.
On certain trucks, the backup lamps could be blocked and may not be visible. As a result, the trucks don't meet the requirements of the Canadian regulations. Note: This recall only affects trucks equipped with a pintle hook lowering bracket and feature code 01WPN, 01 WPS, or 01VAL.
Backup lamps that aren't visible could cause a person not to recognize that the vehicle is backing and increase the risk of a crash.
Navistar will notify owners by mail and instruct you to take your truck to a dealership to install new tail stop/turn signal lamps with integrated backup lamps.
On certain vehicles equipped with a no-idle heating, ventilation and air conditioning (HVAC) module, the electrical harness supplying power to the module may not be of sufficient size, which could cause a voltage drop in the harness and an increase in resistance and heating at the connector. This could cause a fire, potentially resulting in injury and/or damage to property. Correction: Dealers will install a revised harness.
A failure of this component (heater and defroster) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain trucks equipped with the electronic fifth wheel jaw release system, incorrect air line routing could allow the fifth wheel jaw to release without driver input. This could result in a trailer separating from the truck, resulting in a possible hazard to other road users and increasing the risk of a crash causing injury and/or property damage. Correction: Dealers will inspect air line routing and correct if necessary.
A failure of this component (accessories) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain trucks, the passenger side windshield wiper linkage rod may separate from either the wiper motor drive arm or the passenger side pivot assembly. If the linkage separates, the passenger side wiper arm will no longer operate which could lead to reduced driver visibility. Decreased driver visibility may increase the risk of a crash possibly resulting in property damage, personal injury, or death. Correction: Dealers will install a redesigned windshield wiper linkage assembly.
A failure of this component (visual system) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles equipped with an optional jump start stud, corrosion at the base of the stud may cause an electrical short between the stud and battery box resulting in a vehicle fire causing property damage, personal injury, or death. Correction: Dealers will install a new redesigned jump start stud.
A failure of this component (electrical) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the air line that supplies the traction solenoid valve of the Roll Stability Control (RSC) system may have been connected to an incorrect port of the air tank. This condition will affect air modulation to the trailer brakes if the RSC is activated during a roll stability event. Less than optimal RSC control of the trailer brakes during a roll stability event may increase the risk of a crash which could result in property damage, personal injury or death. Correction: Dealers will inspect and, if necessary, relocate the air line that supplies the RSC traction solenoid valve to the correct port on the air tank.
A failure of this component (brakes) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain trucks, the service brake air line between the tractor protection valve and the fast brake module may separate from the fast brake module. This would result in a loss of trailer service brakes, which could increase stopping distances, possibly causing a vehicle crash resulting in property damage, personal injuries or death. Correction: Dealers will replace the fast break module and reroute air lines to eliminate line tension.
A failure of this component (brakes) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the potting material that encapsulates the circuit board of the remote power module may not sufficiently seal the circuit board from water and contamination intrusion. If the encapsulation is compromised, water and contaminants may cause an internal electrical short. An electrical short could cause a fire which can result in property damage, personal injury, or death. Correction: Dealers will install a fused electrical cable in the ground circuit of each suspect vehicle that has one or more remote power module(s).
A failure of this component (electrical) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain vehicle may have been assembled with an incorrectly manufactured Bendix MV-3 dash control valve. If the double check valve becomes lodged, in the event of a primary reservoir failure, air pressure can leak past the lodged valve, thereby depleting the secondary reservoir, causing a reduced ability for modulating the emergency brakes. Extended stopping distances may result in a vehicle crash, causing property damage, and/or personal injury or death. Correction: Dealers will inspect and, if necessary, replace the dash control valve.
A failure of this component (brakes) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain trucks, the hood travel limiting shock bracket may fail. Should the shock separate while the hood is being opened, it would allow the hood to keep tilting forward, possibly injuring its operator or a bystander. Correction: Dealers will replace the hood travel limiting shock connection pin and retention system with an updated version.
A failure of this component (other) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.