Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Kia Sedona model year.
Safety recall notices and repair campaigns registered for the 2006 Kia Sedona in Canada.
On certain vehicles, moisture can enter the brake Hydraulic Electronic Control Unit (HECU) and cause a short circuit.
A short circuit could create a fire risk. This can happen even if the vehicle is parked.
Kia will notify owners by mail and instruct you to take your vehicle to a dealer to install a relay to power off the HECU when the vehicle is turned off. Kia recommends that you should park your vehicle outdoors, and away from other vehicles or structures until the recall repairs have been completed.
On certain vehicles, road salt can corrode the front control arms, which may ultimately lead to control arm failure. This could result in a loss of vehicle control, increasing the risk of a crash causing injury and/or property damage. Correction: For 2006-2007 model year vehicles, dealers will replace the front lower control arms if they were not previously replaced under recall 2013-388. For 2008-2012 model year vehicles, dealers will inspect the control arms and either apply an anticorrosion treatment or replace the control arms, as necessary. Note: This recall supersedes recall 2013-388.
A failure of this component (suspension) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the secondary hood latch could corrode, and may result in the mechanical binding of the latch. This could cause the secondary hood latch to remain in the open position when the hood is closed. If the vehicle were to be driven with the primary hood latch disengaged, there is a potential that the secondary hood latch may not hold the hood closed as designed while the vehicle is in motion. If this were to occur, it could compromise the driver’s ability to see the road and its users, as well as cause damage to the windshield. These issues could result in a crash causing injury and/or property damage. Correction: Dealers will replace the secondary latch with an improved secondary latch with an enhanced corrosion coating.
A failure of this component (structure) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, road salt can corrode the front control arms, which may ultimately lead to control arm failure. This could result in a loss of vehicle control, increasing the risk of a crash causing injury and/or property damage. Correction: Dealers will inspect the control arms and either apply an anticorrosion treatment or replace control arms, as necessary.
A failure of this component (suspension) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the stop lamp switch may have been incorrectly installed during vehicle assembly. This could prevent proper brake lamp operation. Failure of the brake lamps to illuminate when the brakes are applied may result in the following road users being unaware of the driver's intentions, increasing the risk of a crash causing injury or death. A malfunction of the switch may also cause the brake lamps to remain illuminated when the brake pedal is released. Additionally, a faulty switch may affect the operation of the brake-transmission shift interlock on automatic transmission-equipped vehicles so that the transmission shifter would not be able to be shifted out of PARK position. It may also cause the Electronic Stability Control (ESC) light to illuminate, and it may not deactivate the cruise control when the brake pedal is depressed. Correction: Dealers will replace the stop lamp switch assembly.
A failure of this component (electrical) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles equipped with adjustable brake pedals, the stop lamp switch wiring harness may be out of position. An improperly positioned harness could make contact with the u-joint assembly of the steering column. Repeated contact may eventually cause the wiring harness insulation to chafe. An electrical short could result in the loss of brake lights, engine stalling, or an inability to start the vehicle. Correction: Dealers will reposition the wiring harness.
A failure of this component (lights and instruments) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles the rear brake caliper hoses may be out of position. This could allow contact with the rear suspension, resulting in loss of brake fluid and a reduction of braking ability causing a crash. Correction: Dealers will adjust or replace the hoses as necessary.
A failure of this component (brakes) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.