Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Lincoln Aviator model year.
Safety recall notices and repair campaigns registered for the 2023 Lincoln Aviator in Canada.
On certain vehicles the recall repairs completed by a Ford dealer during recall 25S67 (Transport Canada recall no. 2025-328) may not be effective. As a result, a second repair is required. On certain vehicles, the trim for the seat fold switch on the second-row outboard seats could become stuck. If this happens, the seat(s) could fold and/or move unexpectedly. Note: This recall replaces Transport Canada recall no. 2025-328. Vehicles that were repaired under that recall also require this repair.
A seat that folds and/or moves could increase the risk of injury in a crash.
Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the seat fold switch trim and housing for one with an improved design.
On certain vehicles, the second-row outboard seat belt anchor bolt(s) may be loose or missing. As a result, the seat belt(s) could detach in a crash.
A seat belt that detaches could increase the risk of injury in a crash.
Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, install, tighten or replace seat belt anchor bolt(s).
On certain vehicles, a software problem could cause the rearview camera image not to display properly when the transmission is shifted into reverse. Canadian regulations require the rearview image to display when the vehicle is reversing.
A rearview camera image that doesn't display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Ford will notify owners by mail. The corrective actions for this recall are under development.
On certain vehicles, the low-pressure fuel pump could fail. If this happens, the engine may run rough or may not start and the check engine light may turn on. This could also result in a sudden loss of engine power while driving.
A sudden loss of engine power could increase the risk of a crash.
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the powertrain control module software. For Super Duty models, the dealer will replace the fuel pump.
On certain vehicles, a software problem could cause the rearview camera image not to display when the transmission is shifted into reverse. Canadian regulations require the rearview image to display when the vehicle is reversing.
A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the SYNC software.
On certain vehicles, the exterior C-pillar trim(s) and/or window division bar(s) on the rear passenger doors may not be properly attached. As a result, the trim(s) and/or bar(s) could loosen and separate from the vehicle.
Parts that detach from the vehicle could create a road hazard for others and increase the risk of a crash.
Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the C-pillar trims and window division bars.
On certain vehicles, the trim for the seat fold switch on the second-row seats may not have been installed properly. As a result, the switch could become stuck. If this happens, the seat(s) could fold and/or move unexpectedly.
A seat that folds and/or moves could increase the risk of injury in a crash.
Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the seat fold switch trim.
On certain vehicles, the recall repairs completed by a Ford dealer during recall 22C35 (Transport Canada recall no. 2022-743) may not have been done correctly. As a result, a second repair is required. On certain vehicles, the seat belt reminder chime may not sound for long enough when you start the vehicle, and your seat belt is not buckled. Canadian regulations require both a seat belt reminder sound and visual telltale when a driver is not wearing their seat belt. Note: This recall only affects vehicles with a Revel audio system.
A seat belt warning that doesn't work correctly may not remind you to buckle your seat belt. Not wearing your seat belt can increase the risk of injury in a crash.
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the audio control module software.
On certain vehicles, the recall repairs completed by a Ford dealer during recall 23S23 (Transport Canada recall no. 2023-288) may not have been done correctly. As a result, a second repair is required. On certain vehicles equipped with a 360-degree camera, a software problem could cause the rearview camera image not to appear on the SYNC display screen. Canadian regulations require the rearview image to display when the vehicle is reversing.
A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the image processing module (IPMB) software.
On certain vehicles, a cell phone signal could interfere with the accessory protocol image module (APIM) and cause the rearview camera image to flicker. Canadian regulations require the rearview image to display when the transmission is shifted into reverse gear.
A rearview camera image that doesn't display properly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Ford will notify owners by mail and advise you to take your vehicle to a dealership to install a cover on the APIM.
On certain vehicles equipped with a 360-degree camera, a software problem could cause the rearview camera image not to appear on the SYNC display screen. Canadian regulations require the rearview image to display when the vehicle is reversing. Note: This recall replaces recall 23S02 (Transport Canada Recall No. 2023-018). Vehicles that were repaired under that recall also require this second repair.
A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the image processing module (IPMB) software.
On certain vehicles, the seat belt reminder chime may not sound for long enough when you start the vehicle, and your seat belt is not buckled. Canadian regulations require both a seat belt reminder sound and visual telltale when a driver is not wearing their seat belt. Note: This recall only affects vehicles with a Revel audio system.
A seat belt warning that does not work correctly may not remind you to buckle your seat belt. Not wearing your seat belt can increase the risk of injury in a crash.
Ford will notify owners by mail and instruct you to take your vehicle to a dealership to update the audio control module software.
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.