2021 Lincoln Corsair Recall

On certain vehicles, a software problem could cause the rearview camera image not to display properly when the transmission is shifted into reverse. Canadian regulations require the rearview image to display when the vehicle is reversing.

A rearview camera image that doesn't display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.

Ford will notify owners by mail. The corrective actions for this recall are under development.

On certain vehicles, the windshield wiper motor may not have been manufactured properly. As a result, the motor could fail and cause the windshield wipers not to work.

Windshield wipers that don't work could reduce visibility and increase the risk of a crash.

Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the windshield wiper motor.

On certain vehicles, the software update installed by a Ford dealer during recall 24S79 (Transport Canada recall no. 2024-781) may not be effective. As a result, a second repair is required. On certain vehicles, a problem inside the high-voltage battery could cause a short circuit. If this happens, there could be a loss of power to the wheels and/or the high-voltage battery could overheat. Note: This recall replaces Transport Canada recall no. 2025-628. This recall only affects certain plug-in hybrid vehicles (PHEV) equipped with a 2.5 L engine.

A loss of power to the wheels could increase the risk of a crash. A battery that overheats can create a fire risk, even while the vehicle is parked and turned off.

To reduce the safety risk, Ford advises that you set the maximum charge setting of your vehicle at 80% and to only use normal EV mode until the recall repairs have been completed. Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the battery energy control module (BECM) and hybrid powertrain control module (HPCM) software. The BECM software will monitor the high-voltage battery and warn you if it detects a problem. If you see this warning, you should contact a dealership to arrange replacement of the high-voltage battery pack.

On a small number of vehicles, the recall repairs completed by a Ford dealer during recall 25S54 (Transport Canada recall no. 2025-283) may not have been done correctly. As a result, another repair is required. On certain vehicles equipped with a 2.5 L HEV or PHEV engine, a manufacturing problem could lead to an engine failure. In some cases, an engine failure can create the risk of a fire.

An engine failure could cause a fire.

Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the powertrain control module (PCM) software. To reduce the safety risk, Ford recommends that you should shut off the engine as soon as possible if you hear unusual engine noises, see smoke from the engine compartment, or notice reduced engine power.

On certain vehicles, the engine block heater could leak coolant. If this happens, the block heater could short circuit when it's plugged in. Note: This recall replaces Transport Canada recall no. 2025-554. Vehicles that were repaired under that recall don't require this repair.

A short circuit can create the risk of a fire.

To reduce the safety risk, Ford advises you not to use the engine block heater until the recall repairs have been completed. Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the block heater. Alternatively, owners can choose to have the dealership permanently disable the engine block heater.

On a small number of vehicles, the recall repairs completed by a Ford dealer during recall 25C18 (Transport Canada recall no. 2025-277) may not have been done correctly. As a result, another repair is required. On certain vehicles, the seat belt reminder chime may not sound for long enough when you start the vehicle, and your seat belt is not buckled. Canadian regulations require both a seat belt reminder sound and visual telltale when a driver is not wearing their seat belt. Note: This recall only affects vehicles with a Revel audio system.

A seat belt warning that doesn't work correctly may not remind you to buckle your seat belt. Not wearing your seat belt can increase the risk of injury in a crash.

Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the audio control module software.

On certain vehicles, the software update installed by a Ford dealer during recall 24S79 (Transport Canada recall no. 2024-781) may not be effective. As a result, a second repair is required. On certain vehicles, a problem inside the high-voltage battery could cause a short circuit. If this happens, there could be a loss of power to the wheels and/or the high-voltage battery could overheat. Note: This recall only affects certain plug-in hybrid vehicles (PHEV) equipped with a 2.5 L engine.

A loss of power to the wheels could increase the risk of a crash. A battery that overheats can create a fire risk, even while the vehicle is parked and turned off.

To reduce the safety risk, Ford advises not to charge your vehicle until the recall repairs have been completed. Ford will notify owners by mail. The corrective actions for this recall are under development.

On certain vehicles, the engine block heater could leak coolant. If this happens, the block heater could short circuit when it's plugged in.

A short circuit can create the risk of a fire.

To reduce the safety risk, Ford advises you not to use the engine block heater until the recall repairs have been completed. Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the block heater.

On certain trucks, water could leak into the connector for the rearview camera. Over time, this could cause corrosion to the ground wire. If this happens, the rearview camera image may not display correctly or at all. Note: Vehicles equipped with 360-degree camera systems are not affected by this recall.

A rearview camera image that doesn't display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.

Ford will notify owners by mail and advise you to take your truck to a dealership to replace the rearview camera and the rearview camera wiring harness.

On certain vehicles, a software problem could cause the rearview camera image not to display when the transmission is shifted into reverse. Canadian regulations require the rearview image to display when the vehicle is reversing.

A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.

Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the SYNC software.

On certain vehicles, the recall repairs completed by a Ford dealer during recall 22C35 (Transport Canada recall no. 2022-743) may not have been done correctly. As a result, a second repair is required. On certain vehicles, the seat belt reminder chime may not sound for long enough when you start the vehicle, and your seat belt is not buckled. Canadian regulations require both a seat belt reminder sound and visual telltale when a driver is not wearing their seat belt. Note: This recall only affects vehicles with a Revel audio system.

A seat belt warning that doesn't work correctly may not remind you to buckle your seat belt. Not wearing your seat belt can increase the risk of injury in a crash.

Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the audio control module software.

On certain vehicles, the recall repairs completed by a Ford dealer during recall 23S27 (Transport Canada recall no. 2023-309) may not have been done correctly. As a result, a second repair is required. On certain vehicles equipped with a 2.5 L HEV or PHEV engine, a manufacturing problem could lead to an engine failure. In some cases, an engine failure can create the risk of a fire.

An engine failure could cause a fire.

Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the powertrain control module (PCM) software. To reduce the safety risk, Ford recommends that you should shut off the engine as soon as possible if you hear unusual engine noises, see smoke from the engine compartment, or notice reduced engine power.

On certain vehicles, the recall repairs completed by a Ford dealer during recall 23S23 (Transport Canada recall no. 2023-288) may not have been done correctly. As a result, a second repair is required. On certain vehicles equipped with a 360-degree camera, a software problem could cause the rearview camera image not to appear on the SYNC display screen. Canadian regulations require the rearview image to display when the vehicle is reversing.

A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.

Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the image processing module (IPMB) software.

On certain vehicles, the recall repairs completed by a Ford dealer during recall 24S33 (Transport Canada recall no. 2024-270) may not have been done correctly. As a result, a second repair is required. On certain hybrid vehicles, a software update completed by a Ford dealer could cause the transmission to shift into neutral (N) unexpectedly. If this happens, there could be a sudden loss of power to the wheels.

A loss of power to the wheels could increase the risk of a crash.

Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the hybrid powertrain control module software.

On certain vehicles, the rearview camera image may not display correctly or at all. Note: This recall also affects certain Super Duty incomplete vehicles.

A rearview camera image that doesn't display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.

Ford will notify owners by mail. The corrective actions for this recall are under development.

On certain vehicles, a problem inside the high-voltage battery could cause a short circuit. If this happens, there could be a loss of power to the wheels and/or the high-voltage battery could overheat. Note: This recall only affects certain plug-in hybrid vehicles (PHEV) equipped with a 2.5 L engine.

A loss of power to the wheels could increase the risk of a crash. A battery that overheats can create a fire risk, even while the vehicle is parked and turned off.

To reduce the safety risk, Ford advises not to charge your vehicle until the recall repairs have been completed. Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the battery energy control module (BECM) software. The software will monitor the high-voltage battery and warn you if it detects a problem. If you see this warning, you should contact a dealership to arrange replacement of the high-voltage battery pack.

On certain hybrid vehicles, a software update completed by a Ford dealer could cause the transmission to shift into neutral (N) unexpectedly. If this happens, there could be a sudden loss of power to the wheels.

A loss of power to the wheels could increase the risk of a crash.

Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the hybrid powertrain control module software.

On certain vehicles equipped with a 2.5 L HEV or PHEV engine, a manufacturing problem could lead to an engine failure. In some cases, an engine failure can create the risk of a fire.

An engine failure could cause a fire.

Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the powertrain control module (PCM) software or replace the engine, as necessary. To reduce the safety risk, Ford recommends that you should shut off the engine as soon as possible if you hear unusual engine noises, see smoke from the engine compartment, or notice reduced engine power.

On certain vehicles equipped with a 360-degree camera, a software problem could cause the rearview camera image not to appear on the SYNC display screen. Canadian regulations require the rearview image to display when the vehicle is reversing. Note: This recall replaces recall 23S02 (Transport Canada Recall No. 2023-018). Vehicles that were repaired under that recall also require this second repair.

A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.

Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the image processing module (IPMB) software.

On certain vehicles equipped with a 360-degree camera, a software problem could cause the rearview camera image to not appear on the SYNC display screen. Canadian regulations require the rearview image to display when the transmission is shifted into reverse gear.

A rearview camera image that does not display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.

Ford will notify owners by mail and instruct you to take your vehicle to a dealer to update the image processing module (IPMB) software.

On certain vehicles, the seat belt reminder chime may not sound for long enough when you start the vehicle, and your seat belt is not buckled. Canadian regulations require both a seat belt reminder sound and visual telltale when a driver is not wearing their seat belt. Note: This recall only affects vehicles with a Revel audio system.

A seat belt warning that does not work correctly may not remind you to buckle your seat belt. Not wearing your seat belt can increase the risk of injury in a crash.

Ford will notify owners by mail and instruct you to take your vehicle to a dealership to update the audio control module software.

On certain hybrid models, an engine failure can cause a significant buildup of engine oil and/or fuel vapour under the hood. In some cases, this could cause a fire. Note: This recall only affects certain vehicles equipped with a 2.5 L HEV or PHEV engine.

A buildup of engine oil and/or fuel vapour after an engine failure could cause a fire.

Ford will notify owners by mail and instruct you to take your vehicle to a dealership to modify the under-engine shield and active grille shutter. To reduce the safety risk, Ford recommends that you should shut off the engine as soon as possible if you hear unusual engine noises, see smoke from the engine compartment, or believe the engine has failed.

On certain vehicles equipped with a 360-degree camera, a software problem could cause the rearview camera image to not appear on the SYNC display screen. Canadian regulations require the rearview image to display when the transmission is shifted into reverse gear.

A rearview camera image that does not display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.

Ford will notify owners by mail and instruct you to take your vehicle to a dealer to update the image processing module (IPMB) software.

On certain vehicles, the fuel delivery module could leak inside the fuel tank. If this happens, low fuel pressure could cause the engine not to start, or it could stall while driving.

A sudden loss of engine power could increase the risk of a crash.

Ford will notify owners by mail and instruct you to take your vehicle to a dealer to replace the fuel delivery module.

On certain vehicles, the rear drive unit was not properly filled with oil. As a result, the rear axle could seize. If this happens, the rear wheels could lock up and cause a loss of power to the wheels.

A rear-wheel lock up while driving could cause a loss of control that could result in a crash.

Ford will notify owners by mail and instruct you to take your vehicle to a Ford or Lincoln dealer to check the oil level in the rear drive unit. If the drive unit is filled to the minimum oil level, it will be topped up to the full level. If the oil is below the minimum level, the drive unit will be replaced.