Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Lincoln Nautilus model year.
Safety recall notices and repair campaigns registered for the 2024 Lincoln Nautilus in Canada.
On certain vehicles, the software update installed by a Ford dealer during recall 25SA2 (Transport Canada recall no. 2025-547) may not be effective. As a result, a second repair is required. On certain vehicles, a software problem could cause the pedestrian alert system not to work properly. Note: This recall only affects hybrid electric vehicles. This recall replaces Transport Canada recall no. 2025-547. Vehicles that were repaired under that recall also require this repair.
A pedestrian alert system that doesn't work properly could create confusion and increase the risk of injury for other road users.
Ford will notify owners by mail and send a wireless over-the-air software update to eligible vehicles to update the accessory protocol image module (APIM) software. Alternatively, you may schedule an appointment to have the update performed at a Ford dealership. For certain Nautilus vehicles, owners will be advised to take their vehicle to a dealership to replace the digital signal processor (DSP) module.
On certain vehicles, a software problem could cause the rearview camera image not to display when the transmission is shifted into reverse. Additionally, certain advanced driver assistance systems may not work properly, including the pre-collision assist and lane keeping system. Note: This problem could cause the "Front Camera Fault", "Pre-Collision Assist Not Available" and/or "Lane-Keeping System Off" warning messages to display in the instrument cluster.
A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Driver assistance systems that don't work could also increase the risk of a crash.
Ford will notify owners by mail and send a wireless over-the-air software update to eligible vehicles to update the image processing module (IPMA) software. Alternatively, you may schedule an appointment to have the update performed at a Ford dealership.
On certain vehicles, the recall repairs completed by a Ford dealer during recall 25C36 (Transport Canada recall no. 2025-413) may not have been done correctly. As a result, another repair is required. When using the key fob "global close" feature to close the windows, a software problem could cause the window automatic reversal system not to work. If this happens, a window may not stop and retract after detecting an object. As a result, the vehicles may not meet certain requirements of Canadian regulations.
A window that closes with too much force could create a risk of injury.
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the driver and passenger door module software.
On certain vehicles, a software problem could cause the pedestrian alert system not to work properly. Note: This recall only affects hybrid electric vehicles.
A pedestrian alert system that doesn't work properly could create confusion and increase the risk of injury for other road users.
Ford will notify owners by mail and send a wireless over-the-air software update to eligible vehicles to update the digital signal processor and audio control module software. Alternatively, you may schedule an appointment to have the update performed at a Ford dealership.
On certain vehicles, the recall repairs completed by a Ford dealer during recall 24C43 (Transport Canada recall no. 2024-776) may not have been done correctly. As a result, a second repair is required. When using the key fob "global close" feature to close the windows, a software problem could cause the window automatic reversal system not to work. If this happens, a window may not stop and retract after detecting an object. As a result, the vehicles may not meet certain requirements of Canadian regulations.
A window that closes with too much force could create a risk of injury.
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the driver and passenger door module software.
On certain vehicles, a software problem could cause the panoramic display (instrument cluster) and center display to restart while driving. If this happens, you may not be able to see certain information about the vehicle, including the speedometer, warnings, and tell-tales. In addition, the rearview camera image may not display when the transmission is shifted into reverse.
Warnings, tell-tales and gauges that don't display could increase the risk of a crash. Additionally, a rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could also increase the risk of a crash.
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the accessory protocol interface module software.
On certain vehicles, the engine block heater could overheat when the block heater is plugged in. Note: This recall only affects certain vehicles equipped with a 1.5 L or 2.0 L engine and a factory-installed block heater.
An engine block heater and/or wiring that overheats or melts could create the risk of a fire.
To reduce the safety risk, Ford advises you not to plug in the engine block heater until the recall repairs have been completed. Ford will notify owners by mail. You can choose to have the dealer remove the block heater, or once the final repair is available, Ford will send you another notice to advise you to take your vehicle to a dealership to replace the block heater element. The dealer will also inspect and, if necessary, replace the block heater electrical cord.
On certain vehicles, the recall repairs completed by a Ford dealer during recall 24C24 (Transport Canada recall no. 2024-463) may not have been done correctly. As a result, a second repair is required. When using the key fob "global close" feature to close the windows, a software problem could cause the window automatic reversal system not to work. If this happens, a window may not stop and retract after detecting an object. As a result, the vehicles may not meet certain requirements of Canadian regulations.
A window that closes with too much force could create a risk of injury.
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the driver and passenger door module software.
When using the key fob "global close" feature to close the windows, a software problem could cause the window automatic reversal system not to work. If this happens, a window may not stop and retract after detecting an object. As a result, the vehicles may not meet certain requirements of Canadian regulations.
A window that closes with too much force could create a risk of injury.
Ford will notify owners by mail. The corrective actions for this recall are under development.
When using the key fob "global close" feature to close the windows, a software problem could cause the window automatic reversal system not to work. If this happens, a window may not stop and retract after detecting an object. As a result, the vehicles may not meet certain requirements of Canadian regulations.
A window that closes with too much force could create a risk of injury.
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the driver and passenger door module software.
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.