Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Mack Rl model year.
Safety recall notices and repair campaigns registered for the 1976 Mack Rl in Canada.
THE ADJUSTABLE STEERING COLUMN REAR MOUNTING BRACKET COULD FAIL, ALLOWING THE STEERING WHEEL ASSEMBLY TO FALL ONTO THE OPERATOR'S LAP. WHILE STEERING WOULD BE FUNCTIONAL THE SURPRISE COULD CAUSE LOSS OF STEERING CONTROL.
A failure of this component (not entered) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
ANTI-WHEEL LOCK VALVES SUPPLIED BY EATON CORPORATION MAY BE EXPOSED TO ACCUMULATED CONCENTRATIONS OF FLUID CONTAMINANTS IN THE AIR BRAKE SYSTEM THAT COULD CAUSE THE PISTON TO STICK THEREBY PREVENTING ANY AIR FROM BEING DELIVERED TO THE AIR BRAKE CHAMBERS SUPPLIED BY THAT VALVE. LTHIS CONDITION WILL RESULT IN A NO BRAKE APPLICATION ON THE AFFECTED AXLE, THEREBY EXTENDING VEHICLE STOPPING DISTANCES.
A failure of this component (not entered) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
THE EATON MODEL 21 ANTI-WHEEL LOCK CONTROLLER MAY MALFUNCTION AND PREVENT APPLICATION OF THE BRAKE ON THE AXLE CONTROLLED BY THE DEFECTIVE CONTROLLER. A "NO BRAKE" SITUATION MAY DEVELOP WHICH WOULD AFFECT VEHICLE BRAKING CHARACTERISTICS AND MAY LEAD TO A VEHICLE CRASH.
A failure of this component (not entered) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
TRUCKS EQUIPPED WITH ANCHORLOCK AIR DRYERS. A DESIGN DEFICIENCY EXISTS IN THE AIR DRYER PIPING THAT CAN ALLOW MOISTURE FROM THE COMPRESSED AIR TO FREEZE ALLOWING A BUILD UP OF EXCESSIVE AIR PRESSURE THAT WOULD CAUSE THE AIR PIPING CONNECTIONS TO SEPARATE. THIS WOULD LEAD TO AN AUTOMATIC APPLICATION OF THE CHASSIS EMERGENCY SPIRNG BARKES AND TRAILER BREAKES, WITHOUT WARNING, AND POSSIBLY CAUSE A LOSS OF VEHICLE CONTROL.
A failure of this component (not entered) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
TRUCKS EQUIPPED WITH MACK 6 CYLINDER ENGINES AND FLEXIBLE BLADE ENGINE COOLING FANS. THE FLEXIBLE BLADE FANS MAY DEVELOP FATIGUE CRACKS IN THE LAMINATED STIFFENER. CONTINUED ENGINE OPERATION COULD CAUSE A PIECE OF THE STIFFENER TO BREAK OFF AND BE PROPELLED OUTSIDE OF THE FAN SHROUD. A PROPELLED FRAGMENT COULD CAUSE INJURY TO SERVICE PERSONNEL IN THE VICINITY OF AN OPERATING ENGINE.
A failure of this component (not entered) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
TRUCKS EQUIPPED WITH FF-931 FRONT AXLES AND MOTOR WHEEL CORPORATION ALUMINUM WHEEL HUBS. MOTOR WHEEL CORPORATION HAS DETERMINED THAT SOME OF ITS HUBS ARE SUBJECT TO FAILURE FROM A CRACK NEAR THE BASE OF THE INNER BEARING CUP THAT RESULTS IN A FRACTURE BETWEEN THE INNER HUB END AND THE FLANGE PORTION OF THE HUB. CONTINUED OPERATION IN THIS CONDITION COULD CAUSE THE HUB TO SEPARATE FROM THE VEHICLE WITH THE POSSIBILITY OF A VEHICLE CRASH.
A failure of this component (not entered) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
TRUCKS EQUIPPED WITH FL-931 FRONT AXLES WITH DISC WHEELS AND ROCKWELL INTERNATIONAL ALUMINUM FRONT WHEEL HUBS. ROCKWELL INTERNATIONAL HAS DETERMINED THAT A DEFICIENCY EXISTS IN ITS 333-P-2304 FORGED ALUMINUM FRONT WHEEL HUBS (PART NO. 333-N-2302) IN THE BARREL SECTION BETWEEN THE INNER AND OUTER WHEEL BEARING WHICH MAY RESULT IN CRACKS. CONTINUED OPERATION IN THIS CONDITION COULD CAUSE THE HUB TO SEPARATE FROM THE VEHICLE WITH THE POSSIBILITY OF A VEHICLE CRASH.
A failure of this component (not entered) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
VEHICLES EQUIPPED WITH FORGED ALUMINUM HUBS ON ROCKWELL FF931 AXLES WITH DISC WHEELS. LTHE FORGED ALUMINUM FRONT WHEEL HUBS HAVE A DESIGN DEFICIENCY IN THE BARREL BETWEEN THE INNER AND OUTER BEARINGS WHICH CAN LEAD TO CRACKING AND FAILURE OF THE HUB.
A failure of this component (not entered) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.