Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Mack Rws model year.
Safety recall notices and repair campaigns registered for the 1979 Mack Rws in Canada.
THE SPRING SEAT, WHICH IS LOCATED BETWEEN THE AXLE HOUSING AND THE REAR SUSPENSION SPRING PACK CAN DEFORM, RESULTING IN REDUCED CLAMPING FORCE IN THE SUSPENSION ASSEMBLY. THIS COULD CAUSE AXLE MISALIGNMENT, SPRING "U" BOLT LOOSENESS AND HOUSING FAILURE. AXLE DISLOCATION, WHICH COULD RESULT IN TIRE TO SPRING INTERFERENCE AND POSSIBLE IMPAIRMENT OF VEHICLE CONTROL, COULD OCCUR WITHOUT PRIOR WARNING.
A failure of this component (not entered) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
1978-79 RWL AND RWS SUPERLINER TRUCKS. THE PITMAN ARM RETAINING SCREWS MAY NOT HAVE BEEN TORQUED TO SPECIFICATION. THE SCREWS COULD LOOSEN AND RESULT IN WEAR OF EITHER THE PITMAN ARM SPLINES AND/OR THE STEERING GEAR SHAFT SPLINES. THIS CONDITION CAN LEAD TO LOSS OF STEERING CONTROL AND POSSIBLE CRASH.
A failure of this component (not entered) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
THE THROTTLE RETURN SPRINGS PROVIDES LESS THAN THE TORQUES REQUIRED BY CMVSS 124 - ACCELERATOR CONTROL SYSTEMS.
A failure of this component (not entered) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
ENGINE SUPPORT BRACKET MAY DEVELOP CRACKS DUE TO A DEFICIENCY IN MATERIAL PROPERTIES. COMPLETE FRACTURE COULD CAUSE THE ENGINE TO DROP DOWN INTO THE RADIATOR, DAMAGING THE SHROUD, ENGINE FAN AND OTHER APPROXIMATE PARTS AND PULL ENGINE THROTTLE INTO FULL GOVERNED POSITION THEREBY IMPAIRING VEHICLE CONTROL.
A failure of this component (not entered) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
VEHICLES EQUIPPED WITH TAPER LEAF FRONT SPRINGS MAY HAVE ALUMINUM FRONT SPRING REAR BRAKCETS WITH INADEQUATE STRENGTH TO WITHSTAND NORMAL SIDE LOADINGS. FAILURE OF THE BRACKET COULD ALLOW SOME UPWARD DISLOCATION OF THE STEERING AXLE TO THE AXLE DUMP STOP.
A failure of this component (not entered) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
THE FLANGE HEAD PINCH BOLTS USED IN THE YOKES OF THE STEERING SHAFT ASSEMBLIES MAY HAVE BEEN OVERSTRESSED DUE TO IMPROPER TORQUE SPECIFICATIONS. THIS COULD RESULT IN BREAKAGE OF THE PINCH BOLTS AN POSSIBLE LOSS OF STEERING CONTROL WITHOUT PRIOR WARNING.
A failure of this component (not entered) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
VEHICLES EQUIPPED WITH MACK RA23 OR RA24 REAR AXLES MAY CONTAIN REAR SUSPENSION SPRING SEATS THAT COULD DEFORM ON SPRING DEFLECTION RESURING GEAR OUTPUT SHAFT SPLINES AND ULTIMATELY LEAD TO A LOSS OF VEHICLES EQUIPPED WITH MACK RA23 OR RA24 REAR AXLES MAY CONTAIN REAR SUSPENSION SPRING SEATS THAT COULD DEFORM ON SPRING DEFLECTION RESULTING IN REDUCED CLAMPING FORCE. THIS COULD RESULT IN SPRING SLIP FAILURE ALLOWING THE AXLE TO DISLOCATE CAUSING TIRE/SPRING INTERFERENCE AND POSSIBLE LOSS OF VEHICLE CONTROL.
A failure of this component (not entered) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
TRUCKS EQUIPPED WITH MACK ENDT (B) 676, ETAZ (B) 673A AND ETAY (B) 673A ENGINES WITH AIRESEARCH TV6103 TURBO-CHARGERS. IN SOME INSTNACES OF TURBOCHARGER COMP[RESSOR WHEEL FAILURE THE CAPSCREWS RETAINING THE COMPRESSOR BACK PLATE MAY BE STRUCK BY PART OF THE COMP-RESSOR WHEEL. HTIS CAN RESULT IN THE CAPSCREWS BEING STRETCHED OR SHEARED, ALLOWING THE BACKPLATE TO DISLOCATE AND PRESSURIZED ENGINE OIL TO CONTACT THE HOT TURBOCHARGER TURBINE HOUSINGS AND/OR ENGINE EXHAUST MANIFOLD SECTIONS, THUS CREATING A POTENTIAL FOR ENGINE COMPARTMENT FIRE.
A failure of this component (not entered) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
TWO SET SCREWS THAT ARE PART OF THE UPPER STEERING SHAFT BEARING ASSEMBLY LOCATED AT THE CAB DASH SHEET MAY NOT HAVE BEEN ADEQUATELY TIGHTENED AND MAY ALLOW UPPER STEERING SHAFT MOVEMENT. THIS CONDITION CAN RESULT IN INADEQUATE ENGAGEMENT IN THE SPLINES OF THE LOWER STEERING SHAFT. DURING FRONT AXLE ARTICULATION, THE LOWER STEERING SHAFT CAN DISENGAGE RESULTING IN A LOSS OF STEERING CONTROL WITHOUT PRIOR WARNING.
A failure of this component (not entered) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
TRUCKS EQUIPPED WITH MANUAL STEERING. SUBJECT VEHICLES MAY HAVE BEEN BUILT WITH PITMAN ARM RETAINING NUTS THAT WERE NOT TORQUED TO SPECIFICATION. THIS CONDITION COULD RESULT IN INADEQUATE RETENTION OF THE NUT TO THE OUTPUT SHAFT ALLOWING THE PITMAN ARM TO COME LOOSE. IF THIS CONDITION IS NOT CORRECTED, THE SPLINED GROOVES ON THE OUTPUT SHAFT COULD WEAR SMOOTH CAUSING A LOSS OF STEERING CONTROL.
A failure of this component (not entered) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.