Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Mazda 626 model year.
Safety recall notices and repair campaigns registered for the 1988 Mazda 626 in Canada.
NOTE: 626 - 16,682 UNITS. 929 - 3,001 UNITS. THE FRONT OUTER DOOR HANDLES CAN PREMATURELY FAIL AT THE POINT WHERE THE HANDLE CONNECTS TO THE ROD THAT ACTIVATES THE DOOR LOCK. IF THE ROD WERE TO FALL INBOARD INTO THE PATH OF THE WINDOW GLAZING, LOWERING THE WINDOW COULD RESULT IN PRESSURE ON THE ROD AND COULD CAUSE THE DOOR TO INADVERTENTLY OPEN IF UNLOCKED. CORRECTION: A SAFETY SHIELD WILL BE INSTALLED BETWEEN THE OUTER SURFACE OF THE WINDOW GLAZING AND THE DOOR HANDLE OPERATING MECHANISM.
A failure of this component (structure) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
AT AMBIENT TEMPERATURES BELOW -18 DEGREES CELSIUS, FROST MAY ACCUMULATE WITHIN THE THROTTLE BODY UNDER CONDITIONS OF EXTENDED CONSTANT SPEED OPERATION. THIS COULD RESULT IN A HEAVY ACCELERATOR PEDAL AND CAUSE UNEVEN THROTTLE VALVE RETURN. CORRECTION: THE SINGLE STAGE ENGINE COOLANT THERMOSTAT WILL BE REPLACED WITH A DUAL STAGE THERMOSTAT EQUIPPED WITH A SUBVALVE TO INCREASE THE TEMPERATURE WITHIN THE THROTTLE BODY. V.I.N. RANGE: JM1GD3120J1500014 TO JM1GD2226J1573252.
A failure of this component (engine) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
TRANSPORTATION BY RAIL COULD CAUSE THE REAR BRAKE SHOE WEB TO COME OFF THE WHEEL CYLINDER PISTON GROOVE. THIS CONDITION WILL CAUSE DAMAGE TO THE WHEEL CYLINDER DUST BOOT AND MAY CAUSE DUST AND WATER INTRUSION INTO THE WHEEL CYLINDER RESULTING IN PISTON CORROSION. THIS WOULD INHIBIT REAR BRAKE EFFECTIVENESS. CORRECTION: VEHICLES WILL BE INSPECTED AND WHEEL CYLINDER DUST BOOT WILL BE REPLACED WHERE REQUIRED. ALL INVOLVED VEHICLES WILL HAVE LUBRICANT APPLIED TO THE WHEEL CYLINDER PISTON GROOVE. V.I.N. RANGE: JM1GD3120J1500014 TO JM1GD2218J1541323
A failure of this component (brakes) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
THE FUEL TANK STRAPS MAY NOT BE PROPERLY TIGHTENED AND MAY RUB AGAINST THE FUEL TANK. THIS COULD CAUSE THE TANK'S PROTECTIVE COATING TO WEAR THROUGH RESULTING IN SURFACE DAMAGE AND EVENTUAL TANK PERFORATION AND FUEL LEAKAGE. CORRECTION: RUBBER INSULATOR WILL BE PLACED BETWEEN THE TANK STRAPS AND THE TANK AND THE TANK STRAPS WILL BE PROPERLY TIGHTENED. ALSO, A NEW PROTECTIVE COATING WILL BE APPLIED WHERE REQUIRED. V.I.N. RANGE: JM1GD3120J1500014 TO JM1GD2210J1537936
A failure of this component (structure) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.