CANADA Transport Canada Safety Recalls
EN FR
auto-recalls.ca

Canadian Safety Recalls Database

Home / Mazda / B Series / 2010 Mazda B Series
4 Active Safety Recalls

2010 Mazda B Series Recall

Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.

4
Safety Recalls
CMVSS
Safety Standard
Transport Canada
Official Source
VIN Decoder

VIN Decoder

Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.

Active Safety 2010 Mazda B Series Recalls (4)

Safety recall notices and repair campaigns registered for the 2010 Mazda B Series in Canada.

Ref #2021-198 Campaign : 2118A
2021-04-01 3 330 units

Airbag

Issue Description

On certain trucks, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Note: This is an expansion of Mazda Recall 2118A (Transport Canada Recall No. 2018-039).

Safety Risk

If the truck is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.

Corrective Action & Repair

Mazda will notify owners by mail and instruct you to take your vehicle truck to a dealer to replace the passenger-front airbag inflator. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2021-145 Campaign : 4821C
2021-03-12 13 719 units

Airbag

Issue Description

On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.

Safety Risk

If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.

Corrective Action & Repair

Mazda will notify owners by mail and instruct you to take your vehicle to a dealer to replace the driver-front airbag inflator. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2011-078 Campaign : 6311B
2011-02-23 992 units

Fuel System

Issue Description

On certain vehicles equipped with a 2.3L engine, the fuel line in the area of the throttle body shield may not have the protective convolute properly installed. If the protective convolute on the fuel line is not assembled in the proper position, the fuel line may contact the edge of the shield. Over time this contact may chafe the fuel line, resulting in a fuel leak. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will trim the throttle body shield, inspect the fuel line for damage, and replace the line if necessary.

Safety Risk

A failure of this component (fuel system) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2010-154 Campaign : 5910E
2010-05-11 520 units

Brakes

Issue Description

On certain vehicles, the right rear parking brake cable may disconnect from the parking brake actuating lever when the parking brake pedal is released and the parking brake shoes are frozen to the drum. The cable may lift off the lever as it moves when the parking brake is released, if the brakes are sufficiently frozen so that the lever does not move. Should the right rear parking brake cable becomes disconnected, the parking brake pedal will exhibit extended travel and may not be able to fully apply the parking brake in subsequent use. If the vehicle is equipped with a manual transmission, and is parked in neutral without a fully applied parking brake, the vehicle may move unintentionally and cause property damage or personal injury to bystanders. Correction: Dealers will install a revised right side actuator with the lever pivot located at the top of the actuator.

Safety Risk

A failure of this component (brakes) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Vehicle Profile & Safety Standards

Vehicle Specifications & Compliance Benchmark

Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.

Safety Recall Coverage
4 bulletins
Transport Canada safety defect records
Safety Compliance
CMVSS / NSVAC
Motor Vehicle Safety Act standards
NRCan EnerGuide
Trim-Specific
Varies by engine, drive & transmission
VIN Specifications
14 Attributes
Decode exact engine & plant via VIN above

All Mazda B Series Model Years

Explore safety recall records by model year.

View Model Overview