CANADA Transport Canada Safety Recalls
EN FR
auto-recalls.ca

Canadian Safety Recalls Database

Home / Nissan / Altima / 2002 Nissan Altima
5 Active Safety Recalls

2002 Nissan Altima Recall

Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.

5
Safety Recalls
CMVSS
Safety Standard
Transport Canada
Official Source
VIN Decoder

VIN Decoder

Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.

Active Safety 2002 Nissan Altima Recalls (5)

Safety recall notices and repair campaigns registered for the 2002 Nissan Altima in Canada.

Ref #2007-364 Campaign : R126
2007-11-13 40 666 units

Engine

Issue Description

On certain vehicles equipped with a 2.5L engine, the crank angle sensor can malfunction causing the engine to stall. Engine stalling would result in lost propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash. Correction: Dealers will reprogram the Electronic Control Module (ECM) to prevent stalling.

Safety Risk

A failure of this component (engine) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2003-267 Campaign : R86
2003-11-05 74 143 units

Engine

Issue Description

On certain vehicles, the circuit board for the crank position sensor may have an improper solder joint. This could cause the Service Engine Soon warning light to come on, create a no start condition, cause reduced engine power, or cause the engine to stop running without warning during vehicle operation. Correction: Dealers will replace the crankshaft position sensor and both camshaft position sensors.

Safety Risk

A failure of this component (engine) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2003-171 Campaign : R85
2003-07-15 30 132 units

Fuel System

Issue Description

On certain vehicles at extremely cold temperatures, moisture in the fuel tank may freeze and form ice crystals. These ice crystals may obstruct the suction opening of the fuel pump which can prevent the supply of fuel to the engine and cause the engine to stop. Correction: Dealer will install a screen at the suction opening of the fuel pump.

Safety Risk

A failure of this component (fuel system) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2003-060 Campaign : R80
2003-03-10 30 589 units

Engine

Issue Description

On certain vehicles equipped with the 2.5 liter engine, the exhaust pipe hanger pin may catch debris from the road which could be ignited by contact with the main catalyst. Correction: Dealer will remove the protruding portion of the exhaust pipe hanger pin. Also, certain operating conditions may cause the pre-catalyst to overheat and damage the catalyst substrate. If substrate particles enter the combustion chamber, they may score the cylinder walls, resulting in increased oil consumption. If the engine oil level is not checked on a periodic basis, engine damage may occur which could result in fire. Correction: Dealer will reprogram the engine control unit to prevent the possibility of the pre-catalyst overheating. If the conversion efficiency of the pre-catalyst has deteriorated, then the catalyst will be replaced. The original pre-catalyst will then be inspected for evidence of damage to the catalyst substrate. If damage is present, the vehicle engine will be replaced.

Safety Risk

A failure of this component (engine) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2003-045 Campaign : R79
2003-02-21 4 487 units

Airbag

Issue Description

On certain vehicles, the clockspring electrical connector may not be fully secured to the driver side air bag module squib pin connector due to the retaining groove in the module not having sufficient depth to hold the connector in the assembled position. If the connector comes loose, the supplemental air bag warning light will come on. However, the driver side air bag will not deploy in the event of a crash. Correction: Dealer will install a retaining clip on the clockspring electrical connector.

Safety Risk

A failure of this component (airbag) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Vehicle Profile & Safety Standards

Vehicle Specifications & Compliance Benchmark

Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.

Safety Recall Coverage
5 bulletins
Transport Canada safety defect records
Safety Compliance
CMVSS / NSVAC
Motor Vehicle Safety Act standards
NRCan EnerGuide
Trim-Specific
Varies by engine, drive & transmission
VIN Specifications
14 Attributes
Decode exact engine & plant via VIN above

All Nissan Altima Model Years

Explore safety recall records by model year.

View Model Overview