Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Oldsmobile Alero model year.
Safety recall notices and repair campaigns registered for the 2001 Oldsmobile Alero in Canada.
On certain vehicles, a defect in the ignition switch could allow the switch to move out of the "run" position if the key ring is carrying added weight or the vehicle goes off-road or is subjected to some other jarring event. If this were to occur, engine power, power steering and power braking would be affected, increasing the risk of a crash causing injury and/or damage to property. The timing of the key movement out of the “run” position, relative to the activation of the sensing algorithm of the crash event, may also result in the airbags not deploying in a subsequent collision, increasing the risk of injury. Correction: For each key, dealers will install two key rings and modify the key ring opening shape. Note: Until the correction is performed, all items should be removed from the key ring.
A failure of this component (electrical) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the hazard warning switch may experience solder joint cracking if subjected to rapid temperature transition. If solder joint cracking occurs and results in an open circuit, the turn signals/hazard lamps become intermittent or inoperative. Correction: Dealers will replace the hazard warning switch.
A failure of this component (lights and instruments) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain vehicles do not comply with the requirements of CMVSS 114 - Locking System. When a driver attempts to shift from 5th gear to reverse, a shift inhibitor causes the transmission to be mechanically in 4th gear even though the shift lever indicates reverse gear. In this situation, the key can be removed from the ignition while the transmission is in a forward gear, which is not permitted by the standard. Correction: Dealers will disable the 5th/Reverse Inhibitor by removing a retaining pin and replace the shifter assembly.
A failure of this component (powertrain) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.