Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Saturn Ls model year.
Safety recall notices and repair campaigns registered for the 2000 Saturn Ls in Canada.
On certain vehicles, the plastic housing in the rear tail lamp assembly can become distorted if the brake lamps remain on for an extended time. This can cause (1) an intermittently inoperative brake/tail lamp bulb or (2) a short circuit that opens a fuse causing inoperative brake lamps (including the center high-mounted stop lamp) or tail lamps. The loss of one of both of the tail lamps/stop lamps could reduce the vehicle's visibility to following drivers and fail to warn others that the vehicle is braking and/or stopped, which could lead to a crash. Correction: Dealers will replace the lamp socket and, if necessary, the lamp housing assembly.
A failure of this component (electrical) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, a failure of the ignition control module may cause deterioration in idle quality, reduction in overall engine power and the vehicle may be hard to start.. Continued operation of the vehicle after such an ignition module failure will result in the "Service Engine Soon" light flashing, and may lead to secondary failures of the catalytic converter, oxygen sensor, and exhaust resonator. Failure of the resonator will cause increased exhaust noise and prolonged operation of the vehicle following a resonator failure may lead to an undercar fire. Correction: Dealers will (1) replace the ignition control module, or (2) replace the ignition control module and spark plugs, or (3) replace the ignition control module and spark plugs and update the powertrain control module calibration.
A failure of this component (other) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain vehicles do not comply with the requirements of C.M.V.S.S. 209 - Seat Belt Assemblies. Vehicles may have been produced with rear seat belt buckle assemblies that will not withstand the force requirements of the standard. In a crash, if the belt buckle fails, there is an increased risk of injury to a rear seat occupant. Correction: Rear seat belt buckle assemblies will be inspected and replaced if necessary.
A failure of this component (seats and restraints) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the fuel tank assemblie has an Over Pressure Relief (OPR) valve that may become stuck open in a frontal collision. If the vehicle rolls over, fuel spillage could occur. If an ignition source is present, a fire could occur. Correction: Dealers will permanently seal the outlet port of the OPR valve.
A failure of this component (fuel system) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.