Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Subaru Legacy model year.
Safety recall notices and repair campaigns registered for the 2000 Subaru Legacy in Canada.
On certain vehicles operated in the "salt-belt" provinces of Manitoba, Ontario, Québec, New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland & Labrador. The rear suspension subframe components were produced with poor paint quality which, after continued exposure to corrosive road salts for a period of several years, may result in rust-out of the component and possible breakage of the subframe. Correction: Dealer will clean and rust-proof with anti-rust oil and anti-rust wax.
A failure of this component (suspension) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain vehicles do not comply with the marking requirements of CMVSS 108 - Lighting System and Retroreflective Devices. The High/Low beam headlamp on these vehicles does not bear a "DOT" marking which is required by the standard. Correction: All High/Low beam headlamp bulbs installed since February 8, 2000 have the correct marking. Since the subject bulbs meets or exceed the performance and design requirements of the standard, and the missing marking will not cause a person to replace, fit or use the bulb in a manner for which they are not intended, no further action will be taken.
A failure of this component (lights and instruments) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the headlamp assemblies may not comply with the marking requirements of CMVSS 108 - Lighting System and Retroreflective Devices. The bulb center mark on the lens has been interchanged between 2-bulb headlamps and 4-bulb headlamps. Correction: No corrective action will be taken due to the inconsequence to vehicle safety. The manufacturing process has been remedied to assure correction of the non-compliance on vehicles manufactured since January 30, 2000.
A failure of this component (lights and instruments) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain vehicles do not comply with Cthe requirements of CMVSS 108 - Lighting System and Retroreflective Devices. The H1 low-beam headlamp bulbs do not bear a "DOT" marking as required by the standard. Correction: Since these bulbs comply with all performance and design requirements of the standard, no corrective action will be taken.
A failure of this component (lights and instruments) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain vehicle do not comply with Regulation 6 - Statement of Compliance. Compliance label was not expressed in both official languages in regard to vehicle classification. Correction: No corrective action will be taken for existing vehicles. Correct compliance label will be affixed in current production vehicles.
A failure of this component (other) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, incorrect application of anti-rust coating (PVC) to the transverse link mounting surface can eventually result in a torque decrease of the bolt that secures the transverse link bracket to the vehicle body. Insufficient torque on the bracket bolts can result in loosening of the bracket and subsequent separation of the transverse link from the vehicle frame. Correction: Vehicles will be inspected and if necessary, PVC will be removed from the vehicle body under the transverse link mounting bracket bolt location and mounting bolts will be retorqued to specification.
A failure of this component (suspension) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.