Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Toyota Highlander model year.
Safety recall notices and repair campaigns registered for the 2001 Toyota Highlander in Canada.
On certain vehicles, if the rear side doors are closed very hard with the Child Protection Lock (CPL) lever in the lock position, there is a possibility that the lock lever may contact the body panel due to insufficient clearance, causing the CPL lever to move into the unlock position. This condition could allow the doors to be opened with the inside door handles while the operator believes that the child protection lock was activated. Correction: Dealer will shorten the CPL levers.
A failure of this component (other) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, there is a breather hose that attaches to the nozzle of the on-board refueling vapor recovery (ORVR) valve, which is located on the topside of the fuel tank. The breather hose is attached with a clamp, whose "tabs" face in the upward direction. When the vehicle was crashed under the new car assessment program (NCAP) test (i.e., 35 mph frontal barrier crash), the clamp "tabs" contacted the underside of the body due to movement of the fuel tank, causing the nozzle to break. In the worst case, nozzle breakage could result in fuel leakage if the vehicle rolls-over after a high speed frontal crash. Correction: Dealers will rotate the specified clamp.
A failure of this component (fuel system) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain sport utiity vehicles. The reservoir filler cap of the brake master cylinder may induce a vacuum, introducing some air into the brake master cylinder reservoir. This could cause abnormal brake noise and increased pedal stroke when the brakes are applied. The increased pedal stroke will lengthen the stopping distance of the vehicle, increasing the risk of a crash. Correction: Dealers will bleed the air from the brake lines and replace the reservoir filler cap.
A failure of this component (brakes) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.