CANADA Transport Canada Safety Recalls
EN FR
auto-recalls.ca

Canadian Safety Recalls Database

Home / Toyota / Highlander / 2005 Toyota Highlander
4 Active Safety Recalls

2005 Toyota Highlander Recall

Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.

4
Safety Recalls
CMVSS
Safety Standard
Transport Canada
Official Source
VIN Decoder

VIN Decoder

Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.

Active Safety Recalls (4)

Safety recall notices and repair campaigns registered for the 2005 Toyota Highlander in Canada.

Ref #2011-397 Campaign : SSC 152 / SSC 153
2011-11-09 23 003 units

Steering

Issue Description

On certain vehicles equipped with a 1MZ-FE or 3MZ-FE V6 engine, the crankshaft pulley may fail. The outer ring may become misaligned, or it may not properly rotate, causing noise and/or illumination of the discharge warning light. In addition, the power steering belt may become detached from the crankshaft pulley, which could result in a sudden increase in steering effort. A loss of steering power assist could result in a crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the crankshaft pulley.

Safety Risk

A failure of this component (steering) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

View government recall bulletin Free parts & labor under Motor Vehicle Safety Act
Ref #2011-081 Campaign : 143, 144
2011-02-24 30 428 units

Other

Issue Description

On certain vehicles, if the forward retention clip used to secure the floor carpet cover, which is located in front of the center console, is not installed properly, the cover may lean toward the accelerator pedal and interfere with the operation of the accelerator pedal arm. If this occurs, the accelerator pedal could temporarily become stuck in a partially depressed position, rather than return to the idle position. This could result in a loss of throttle control and a crash causing property damage and/or personal injury. Correction: Dealers will replace the floor carpet cover with a newly designed version. Note: This campaign also covers vehicles which may have been previously included in recall 2006168 (Toyota 609).

Safety Risk

A failure of this component (other) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

View government recall bulletin Free parts & labor under Motor Vehicle Safety Act
Ref #2010-361 Campaign : 127, 128
2010-10-21 28 679 units

Brakes

Issue Description

Certain vehicles use brake fluids containing polymers that act as lubricants for certain brake system components. If during vehicle maintenance, brake fluid is used that does not contain such polymers or only small amounts, part of the internal rubber seal located at the end of the brake master cylinder piston may become dry and may curl during movement of the piston. If this occurs, a small amount of the brake fluid could slowly leak from the brake master cylinder into the brake booster, resulting in illumination of the brake warning lamp. If the brake warning light has illuminated and the vehicle continues to be operated without refilling the master cylinder brake fluid reservoir, the driver will begin to notice a spongy or soft brake pedal feel and braking performance may gradually decline. This will increase the stopping distance, increasing the likelihood of a crash. Correction: Dealers will replace the brake master cylinder seal with a newly designed one.

Safety Risk

A failure of this component (brakes) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

View government recall bulletin Free parts & labor under Motor Vehicle Safety Act
Ref #2006-168 Campaign : 609
2006-07-11 14 510 units

Other

Issue Description

On certain vehicles, due to the improper installation of the retaining clips for the floor carpet cover located in front of the center console, there is a possibility that the clips may become loose. If both clips separate from the floor carpet cover, the cover may lean toward the accelerator pedal, causing interference with the accelerator pedal rod. In the worst case, the accelerator pedal may become stuck in a partially depressed position when returning to the idle position. Correction: Dealers will install new clips.

Safety Risk

A failure of this component (other) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

View government recall bulletin Free parts & labor under Motor Vehicle Safety Act
Vehicle Profile & Safety Standards

Vehicle Specifications & Compliance Benchmark

Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.

Safety Recall Coverage
4 bulletins
Transport Canada safety defect records
Safety Compliance
CMVSS / NSVAC
Motor Vehicle Safety Act standards
NRCan EnerGuide
Trim-Specific
Varies by engine, drive & transmission
VIN Specifications
14 Attributes
Decode exact engine & plant via VIN above

All Toyota Highlander Model Years

Explore safety recall records by model year.

View Model Overview