Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Toyota RAV4 model year.
Safety recall notices and repair campaigns registered for the 2019 Toyota RAV4 in Canada.
This recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships. On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt. Note: This recall only affects the following block heater/cord part numbers: C014003034 PK5A408J09 PU14000904 C014003151 PK5A408J13 PU14000905 C014000885 PK5A489J11 PU14000907 C014000888 PK5A489J22 PU14000909 C014000907 PK5A410H00 PU14000911 C014100904 PU14000900 PU14000913 C014100907 PU14000901 PU14003571 C014100911 PU14000902 PK5A489J14 PK5A408J05 PU14000903
Engine block heater wiring that overheats or melts could create the risk of a fire.
Toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.
On certain vehicles, the low-pressure fuel pump could fail. If this happens, then engine may run rough or may not start and the check engine light may turn on. This could also result in a sudden loss of engine power while driving. Note: This recall is an expansion of recalls SRC R95/SRC R96 and SRC RA2/SRC RA3 (Transport Canada Recall Numbers 2020-005 and 2020-088).
A sudden loss of engine power could increase the risk of a crash.
The company will notify owners by mail and instruct you to take your vehicle to a dealer to replace the fuel pump.
On certain vehicles, the cover of the electric power steering (EPS) gearbox may not be properly attached. As a result, water can enter the gearbox and corrode internal components. Under certain conditions, this can result in a loss of power steering assist.
A loss of power steering assist may result in a sudden increase in steering effort, especially at low vehicle speeds. This could increase the risk of a crash.
Toyota will notify owners by mail and instruct you to take your vehicle to a Toyota dealer to replace the electric power steering gear assembly.
On certain vehicles equipped with a 2.5-L 4-cylinder engine, the engine block may be porous. As a result, the engine block could crack and cause internal or external coolant leaks. This could cause engine overheating or internal engine damage and result in an engine failure. For non-hybrid vehicles, this could also result in a sudden loss of engine power while driving. Note: This problem may lead to engine noise, smoke, cause warning lights to turn on and/or cause an audible chime to sound before an engine failure.
A sudden loss of engine power could increase the risk of a crash. Additionally, an engine failure could create the risk of a fire.
The company will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the engine block casting serial number. If the serial number is within the identified range, the dealer will replace the engine with a new one.
On certain vehicles, the hook and loop material used to attach the carpet to its underpadding may not be flame resistant. As a result, when it is tested alone, the loop fasteners do not meet the requirements of Canadian regulations.
As the carpet is always assembled, and the loop fasteners are very small, this problem does not create a safety risk.
This is not a recall. The company has made production changes to ensure that all new vehicles meet the requirements of Canadian regulations.
On certain vehicles, the connector for the audio display unit may have been damaged during assembly. This could cause the backup camera system to not activate when the transmission is shifted into reverse. Canadian regulations require the rearview image to display when in reverse gear.
A rearview camera that does not turn on could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Toyota will notify owners by mail including instructions on how to inspect for the issue. Owners who are uncomfortable inspecting for themselves can take their vehicle to a dealer to have the backup camera system inspected. The audio display unit will be replaced with a new one if necessary.
Canadian energy efficiency ratings, crash protection scores and assembly specifications.
Explore safety recall records by model year.