CANADA Transport Canada Safety Recalls
EN FR
auto-recalls.ca

Canadian Safety Recalls Database

Home / BMW / 3 Series / 2013 BMW 3 Series
11 Active Safety Recalls

2013 BMW 3 Series Recall

Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.

11
Safety Recalls
CMVSS
Safety Standard
Transport Canada
Official Source
VIN Decoder

VIN Decoder

Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.

Active Safety 2013 BMW 3 Series Recalls (11)

Safety recall notices and repair campaigns registered for the 2013 BMW 3 Series in Canada.

Ref #2024-544 Campaign : N/D
2024-08-15 587 250 units

Label

Issue Description

On certain vehicles, the tire and loading information label does not list that there is no spare tire in both official languages. The label reads as "NONE" when it should read as "NONE / AUCUN". Canadian regulations require the information to be listed on the label in both English and French.

Safety Risk

This error does not affect vehicle safety.

Corrective Action & Repair

This is not a recall. The company has corrected the tire and loading information label for all new vehicles.

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2024-468 Campaign : 11 83 24RC
2024-08-13 78 381 units

Engine

Issue Description

On certain vehicles, fluid from the positive crankcase ventilation (PCV) system could leak on the intake air hose. As a result, the fluid could enter the electrical connector for the water pump and cause a short circuit.

Safety Risk

A short circuit can create the risk of a fire, even while the vehicle is parked and turned off.

Corrective Action & Repair

To reduce the safety risk, BMW advises you to park your vehicle outdoors and away from other vehicles or structures until the recall repairs are completed. BMW will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the water pump and electrical connector. The dealer will also install a shield on the connector.

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2022-095 Campaign : 11 80 22RC
2022-03-02 98 111 units

Engine

Issue Description

On certain vehicles equipped with an N52 or N52K 6-cylinder engine, a manufacturing problem could cause the PCV valve heater (blow-by heater) to short circuit and overheat. Note: This replaces Transport Canada recalls 2017-470 and 2019-170. Only vehicles equipped with an N52 or N52K engine require this repair.

Safety Risk

An overheated engine PCV valve heater could create the risk of a fire, even while the vehicle is parked and turned off.

Corrective Action & Repair

BMW will notify owners by mail and instruct you to take your vehicle to a dealer to install a wire harness repair kit. BMW recommends that you should park your vehicle outdoors until the recall repairs have been completed.

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2021-093 Campaign : 32 81 21RC
2021-02-24 1 519 units

Steering

Issue Description

On certain vehicles, the bolts that attach the electric power steering assist motor to the steering gear may corrode and break. This could cause a loss of power steering assist.

Safety Risk

A loss of power steering assist may result in a sudden increase in steering effort, especially at low vehicle speeds. This could increase the risk of a crash.

Corrective Action & Repair

BMW will notify owners by mail and instruct you to take your vehicle to a dealer to replace the bolts and apply a wax sealer. If one or more of the bolts are broken or missing, a new steering gear will be installed.

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2020-008 Campaign : 32 80 20RC / 32 81 20RC
2020-01-15 47 units

Airbag

Issue Description

This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.

Safety Risk

If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.

Corrective Action & Repair

Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the driver-front airbag inflator. The driver-front airbag module or inflator will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2018-587 Campaign : N/D
2018-10-26 10 368 units

Engine

Issue Description

This recall was replaced by Transport Canada Recall No. 2021-711. On certain vehicles, the cooler for Exhaust Gas Recirculation (EGR) module may develop an internal leak and coolant could mix with diesel engine soot/sediment. In rare circumstances, this condition could result in smouldering particles and lead to the melting of the intake manifold, increasing the risk of a fire causing injury and/or damage to property. Correction: Dealers will inspect the EGR cooler, and if necessary, replace it. If it is determined that the EGR cooler has leaked internally, the intake manifold will also be replaced. The EGR pipe connecting the cooler to the manifold will be cleaned. Note: An operator may be alerted to this condition by one or more of the following symptoms: A warning symbol in the instrument cluster displaying a loss of engine coolant, a reduction in engine power, an unpleasant odour (exhaust gas), an unusual noise from the engine compartment, and/or smoke from the engine compartment.

Safety Risk

A failure of this component (engine) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2016-142 Campaign : 72 80 16RC
2016-03-31 104 151 units

Airbag

Issue Description

On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the front driver air bag inflator or air bag module, depending on the vehicle model.

Safety Risk

A failure of this component (airbag) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2015-369 Campaign : N/D
2015-08-14 637 units

Lights And Instruments

Issue Description

Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standard 108 - Lighting System and Retroreflective Devices. The front side markers may be inoperative due to a vehicle software update. This could result in the front side marker lamps not illuminating in conjunction with the parking lamps or headlamps, and no warning message would be displayed in the instrument cluster. The turn signal function of the front side marker lamps would remain operational. This could cause the vehicle to fail to comply with the requirements of the standard, and reduce vehicle conspicuity, which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will update vehicle software.

Safety Risk

A failure of this component (lights and instruments) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2015-136 Campaign : N/D
2015-03-27 1 620 units

Fuel System

Issue Description

On certain vehicles, improper nickel plating of certain fuel pump internal components could contaminate the pump, potentially resulting in an inoperative fuel pump. This could result in a no-start condition, or an engine stall without warning and without the ability to restart the vehicle, which could increase the risk of a crash. Correction: Dealers will replace the fuel pump.

Safety Risk

A failure of this component (fuel system) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2014-435 Campaign : N/D
2014-10-03 1 279 units

Powertrain

Issue Description

On certain vehicles, a defect in manufacturing could result in a loss of oil supply to the vacuum pump. If this were to occur, the vacuum pump could fail, causing a loss of power assist to the braking system. This could cause increased stopping distances, possibly resulting in a crash causing injury and/or damage to property. Correction: Dealers will install a camshaft seal disk locking ring. Note: This is an expansion of recall 2013-330.

Safety Risk

A failure of this component (powertrain) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2013-330 Campaign : N/D
2013-09-27 9 406 units

Brakes

Issue Description

On certain vehicles, a defect in manufacturing could result in a loss of oil supply to the vacuum pump. If this were to occur, the vacuum pump could fail, causing a loss of power assist to the braking system. This could cause increased stopping distances, possibly resulting in a crash causing injury and/or damage to property. Correction: Dealers will install a camshaft seal disk locking ring.

Safety Risk

A failure of this component (brakes) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Vehicle Profile & Safety Standards

Vehicle Specifications & Compliance Benchmark

Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.

Safety Recall Coverage
11 bulletins
Transport Canada safety defect records
Safety Compliance
CMVSS / NSVAC
Motor Vehicle Safety Act standards
NRCan EnerGuide
Trim-Specific
Varies by engine, drive & transmission
VIN Specifications
14 Attributes
Decode exact engine & plant via VIN above

All BMW 3 Series Model Years

Explore safety recall records by model year.

View Model Overview