Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Buick Regal model year.
Safety recall notices and repair campaigns registered for the 1990 Buick Regal in Canada.
Vehicles located in the high corrosion provinces east of the Manitoba/Ontario border. Certain vehicles may exhibit a condition in which the frame/cradle retainer bolts pull through the retainers due to corrosion of the retainer. If both front bolts or both rear bolts pull through, the frame/cradle would not be properly supported and the intermediate steering shaft may separate from the steering gear. If this were to occur while the vehicle was in motion, a vehicle crash could result without prior warning. Correction: Dealers will replace the front and rear frame/cradle bolts and retainers. Note: This recall superceedes TC recall 1995-010.
A failure of this component (suspension) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles located in New Brunswick, Nova Scotia, Newfoundland and Prince Edward Island, extreme levels of moisture and salt can result in corrosion at or near the engine cradle mounts resulting in possible failure of the mounts. If failures occur at both rear mounts or both front mounts, movement of the cradle can cause separation of the steering intermediate shaft resulting in loss of steering control. Correction: Dealers will install reinforcement plates on repairable cradles, non repairable cradles will be replaced.
A failure of this component (steering) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, cracks may develop in the wheel mounting surface, and, should the cracks become severe enough, the wheel could completely separate from the vehicle. This could adversely affect steering and braking control and result in a crash without prior warning. Correction: Vehicles will be inspected and wheels falling within a specified date code range will be replaced.
A failure of this component (suspension) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the rear engine cradle bolts may pull through due to corrosion of the retainers. If this should occur, the cradle would no longer be supported at these mounting locations and the steering shaft may separate from the steering gear. This could result in loss of steering control. Correction: Rear cradle bolts and retainers will be replaced.
A failure of this component (steering) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the steel wheels may develop cracks in the wheel mounting surface and, should the cracks become severe enough, the wheel could completely separate from the vehicle. This could adversely affect steering and braking control and result in a vehicle crash. Correction: Wheels will be inspected and replaced if required.
A failure of this component (suspension) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
THE BRAKE STOPLAMP SWITCH CONTACTS MAY EITHER NOT CLOSE OR NOT OPEN RESULTING IN TWO POSSIBLE SETS OF CONDITIONS. FIRST, IF THE SWITCH CONTACTS WILL NOT CLOSE, THE BRAKE STOPLAMPS WILL NOT ILLUMINATE AND THE CRUISE CONTROL WILL NOT ENGAGE. SECOND, IF THE SWITCH CONTACTS WILL NOT OPEN, THE CONTROL WILL DISENGAGE DURING BRAKE PEDAL APPLICATION BUT WILL RE-ENGAGE WHEN THE BRAKE PEDAL IS RELEASED. (NOTE: THE CRUISE CONTROL WILL REMAIN DISENGAGED IF THE VEHICLE IS SLOWED BELOW 19-23 KILOMETRES. THE DRIVER MAY ALSO DISENGAGE THE CRUISE CONTROL MANUALLY AT THE CRUISE CONTROL SWITCH). CORRECTION: AN IMPROVED STOPLAMP SWITCH WILL BE INSTALLED ON AFFECTED VEHICLES.
A failure of this component (lights and instruments) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain vehicles do not comply with CMVSS 210 - Seatbelt Assembly Anchorages. Anchor bolt may pull through the upper anchorage plate. Correction: Nut assembly with a larger diameter flanged nut will be installed in place of the existing nut assembly.
A failure of this component (seats and restraints) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.