CANADA Transport Canada Safety Recalls
EN FR
auto-recalls.ca

Canadian Safety Recalls Database

Home / Ford / B Series / 1992 Ford B Series
5 Active Safety Recalls

1992 Ford B Series Recall

Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.

5
Safety Recalls
CMVSS
Safety Standard
Transport Canada
Official Source
VIN Decoder

VIN Decoder

Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.

Active Safety 1992 Ford B Series Recalls (5)

Safety recall notices and repair campaigns registered for the 1992 Ford B Series in Canada.

Ref #1997-146 Campaign : 97S77
1997-08-20 324 units

Engine

Issue Description

On certain B600, F600 and P800 vehicles, engine resonance can cause elevated stress conditions and a fatigue failure of the accelerator return springs. A failed return spring could result in the engine not fully returning to idle when the accelerator pedal is released. Correction: Accelerator return springs will be replaced with a torsion spring design.

Safety Risk

A failure of this component (engine) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #1995-186 Campaign : 95S18
1995-10-20 2 537 units

Engine

Issue Description

On certain B700, F700, F800, FT900, L8000, LA8000, LN7000, LN8000, LNT8000, LS8000, LT8000 and LTS8000, the Hand throttle cable may wear the brass swivel block on the governor lever through which it passes. In some cases the wear may result in the cable jamming in the damaged swivel, which could prevent the governor lever from returning to the idle position. Correction: A revised governor lever with a stainless steel swivel will be installed on affected vehicles.

Safety Risk

A failure of this component (engine) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #1994-139 Campaign : 94S86
1994-08-31 2 726 units

Steering

Issue Description

NOTE: SCHOOL BUSES EQUIPPED WITH BENDIX C-300N STEERING GEAR. DURING LOW SPEED MANEUVERS, A SEAL IN THE STEERING GEAR ASSEMBLY MAY LEAK, RESULTING IN A REDUCED LEVEL OF POWER ASSIST OUTPUT. IN ADDITION, SOME OF THESE VEHICLES MAY BE SUSCEPTIBLE TO FRACTURES OF A SNAP RING IN THE STEERING GEAR, WHICH COULD RESULT IN PROGRESSIVE REDUCTIONS IN RIGHT TURN MAXIMUM WHEEL TRAVEL. CORRECTION: VEHICLES WILL BE INSPECTED AND STEERING GEAR WILL BE REPAIRED OR REPLACED AS NECESSARY.

Safety Risk

A failure of this component (steering) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #1994-063 Campaign : 94S83
1994-03-25 2 813 units

Electrical

Issue Description

On certain B600 and B700 vehicles, the battery power junction block mounted on the right front fender apron might be susceptible to road splash and corrosion from calcium chloride and sodium chloride. This could result in eventual fracture of the main terminal or other terminals at the junction block causing the loss of vehicle power supply or loss of power to a particular system such as the engine, power steering or hydraulic brake boost. Correction: Dealers will replace the junction block, main power terminal from the starter or starter relay and terminals at the existing block. The hydraulic brake circuit will be modified by bypassing the junction block. New terminals will be made from an alloy material more resistant to salt corrosion.

Safety Risk

A failure of this component (electrical) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #1993-157 Campaign : 93S72
1993-11-24 1 783 units

Engine

Issue Description

NOTE: INCLUDES TRUCKS, TRUCK CHASSIS AND BUS CHASSIS. MEDIUM AND HEAVY DUTY VEHICLES EQUIPPED WITH CUMMINS 5.9 LITRE AND 8.3 LITRE DIESEL ENGINES WITH IN-LINE FUEL INJECTION PUMPS MAY HAVE THE POTENTIAL FOR FRACTURE OF THE THROTTLE RETURN SPRINGS. IF BOTH SPRINGS WERE TO FRACTURE THE THROTTLE WOULD NOT RETURN TO THE IDLE POSITION AND MAY RESULT IN INCREASED ENGINE SPEED AND THE POSSIBILITY OF LOSS OF VEHICLE CONTROL. CORRECTION: THROTTLE RETURN CONTROL SYSTEM WILL BE REPLACED WITH THE COIL TORSION SPRING DESIGN.

Safety Risk

A failure of this component (engine) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Vehicle Profile & Safety Standards

Vehicle Specifications & Compliance Benchmark

Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.

Safety Recall Coverage
5 bulletins
Transport Canada safety defect records
Safety Compliance
CMVSS / NSVAC
Motor Vehicle Safety Act standards
NRCan EnerGuide
Trim-Specific
Varies by engine, drive & transmission
VIN Specifications
14 Attributes
Decode exact engine & plant via VIN above

All Ford B Series Model Years

Explore safety recall records by model year.

View Model Overview