2022 Ford Bronco Recall

On certain vehicles, the engine wiring harness may not have enough protection and could become damaged by contact with surrounding components. As a result, the wiring harness could short circuit.

A short circuit can create the risk of a fire.

Ford will notify owners by mail and advise you to take your vehicle to a dealership to install additional protection on the engine wiring harness. The dealer will also repair or replace the engine wiring harness, as necessary.

On certain vehicles, the fender flare(s) may not be properly attached. As a result, the fender flare(s) could loosen and separate from the vehicle. Note: This recall only affects Bronco Raptor models.

A fender flare that detaches from the vehicle could create a road hazard for others and increase the risk of a crash.

Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and repair or replace the fender flares, as necessary.

On certain vehicles, the hard top roof panels may not have been manufactured properly. As a result, sections of the exterior panels could separate and detach from the vehicle while driving. Note: This recall only affects certain vehicles equipped with a molded-in-colour hard top.

A section of roof that detaches from the vehicle could create a hazard for others and increase the risk of a crash.

Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the hard top.

On certain vehicles, the transmission may not have been reassembled properly after service. As a result, the transmission output shaft splines and/or the transfer case input splines could wear and fail. If this happens, there could be a loss of power to the wheels, or the vehicle could move when it's parked and the parking brake isn't used.

A loss of power to the wheels could increase the risk of a crash. A parked vehicle that rolls away could create the risk of an injury or a crash.

Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the transmission and transfer case.

Under certain conditions, the infotainment system could overheat. As a result, the rearview camera image may not display when the transmission is shifted into reverse.

A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.

Ford will notify owners by mail and send a wireless over-the-air software update to eligible vehicles to update the APIM software. Alternatively, you may schedule an appointment to have the update performed at a Ford dealership.

On certain vehicles, the engine block heater could leak coolant. If this happens, the block heater could short circuit when it's plugged in. Note: This recall replaces Transport Canada recall no. 2025-554. Vehicles that were repaired under that recall don't require this repair.

A short circuit can create the risk of a fire.

To reduce the safety risk, Ford advises you not to use the engine block heater until the recall repairs have been completed. Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the block heater. Alternatively, owners can choose to have the dealership permanently disable the engine block heater.

On certain vehicles, the pivot bolts in the height adjuster assembly for the front seats may not have been manufactured properly. As a result, the bolt(s) could loosen and detach. If this happens, the seat(s) could move in a crash.

A seat that moves in a crash could increase the risk of injury.

Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the height-adjust link(s) and pivot bolts.

On certain vehicles, the engine block heater could leak coolant. If this happens, the block heater could short circuit when it's plugged in.

A short circuit can create the risk of a fire.

To reduce the safety risk, Ford advises you not to use the engine block heater until the recall repairs have been completed. Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the block heater.

On certain vehicles, the low-pressure fuel pump could fail. If this happens, the engine may run rough or may not start and the check engine light may turn on. This could also result in a sudden loss of engine power while driving.

A sudden loss of engine power could increase the risk of a crash.

Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the powertrain control module software. For Super Duty models, the dealer will replace the fuel pump.

On certain vehicles, the recall repairs completed by a Ford dealer during recall 22C27 (Transport Canada recall no. 2022-636) may not have been done correctly. As a result, a second repair is required. Under certain conditions when the vehicle is operated in 4WD-Low (4L) mode, the rearview camera image could reappear on the display after shifting out of reverse. Note: This recall only affects certain vehicles equipped with an 8-inch display.

A rearview camera image that displays when the vehicle is not in reverse may confuse or distract the driver. This could increase the risk of a crash.

Ford will notify owners by mail and send a wireless over-the-air software update for the SYNC module to each vehicle. Alternatively, you may schedule an appointment to have the update performed at a Ford dealership.

On certain vehicles, a software problem could cause the rearview camera image not to display or to freeze when the transmission is shifted into reverse.

A rearview camera image that doesn't display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.

Ford will notify owners by mail and send a wireless over-the-air software update to eligible vehicles to update the SYNC software. Alternatively, you may schedule an appointment to have the update performed at a Ford dealership.

On certain vehicles equipped with a 360-degree camera, a software problem could cause the rearview camera image not to appear on the SYNC display screen. Canadian regulations require the rearview image to display when the vehicle is reversing. Note: This recall replaces Transport Canada recall no. 2023-477. Vehicles that were repaired under that recall don't require this repair.

A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.

Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the rearview camera, and modify the camera wire retention as necessary. Some Transit models will also require a software update.

On certain vehicles, the mounting flange between the external reservoirs and the rear shock absorbers may corrode and fail. If this happens, the external reservoir(s) could detach from the vehicle. Note: This recall only affects certain vehicles equipped with Bilstein shock absorbers.

An external reservoir that detaches from the vehicle could create a hazard for other road users and increase the risk of a crash.

Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect the rear shock absorbers. The dealer will apply an anti-corrosion sealant and install a shield, or replace the shock absorbers, as necessary.

On certain vehicles, the tire and loading information label lists the wrong maximum weight of occupants and cargo. Specifically, for Bronco and Super Duty models, the cargo capacity (payload) may have been calculated incorrectly. For the Ranger models, the weight of vehicle options may have been entered incorrectly. As a result, the vehicle could be overloaded. Canadian regulations require companies to print the maximum weight of occupants and cargo on the tire and loading information label.

Incorrect information about the vehicle's weight capacity could lead to overloading and increase the risk of a crash.

Ford will mail a new tire and loading information label to each owner. If you would like help to install it, you can contact a Ford dealer to have it installed free of charge.

On certain vehicles, there may not be enough space between the side of the seat and the interior trim to reach the latch plate for the front seat belt. As a result, it may be difficult to use the seat belts. Note: This recall only affects 5-door models.

Not wearing a seat belt can increase the risk of injury in a crash.

Ford will notify owners by mail and advise you to bring your vehicle to a dealership to install a sliding clip on each front seat belt. This clip will help to reposition the seat belt latch plate. The dealer will also provide an owner's manual update with instructions for how to use the sliding clip correctly.

On certain vehicles, the software update that was installed by a Ford dealer during recall 22C27 (Transport Canada recall number 2022-636) may not be effective. As a result, a second repair is required. Under certain conditions when the vehicle is operated in 4WD-Low (4L) mode, the rearview camera image could reappear on the display after shifting out of reverse. Note: This recall doesn't affect vehicles that received an over-the-air software update for the SYNC module as a part of recall 22C27.

A rearview camera image that displays when the vehicle is not in reverse may confuse or distract the driver. This could increase the risk of a crash.

Ford will notify owners by mail and send a wireless over-the-air software update for the SYNC module to each vehicle. Alternatively, you may schedule an appointment to have the update performed at a Ford dealership.

Under certain conditions when the vehicle is operated in 4WD-Low (4L) mode, the rearview camera image could reappear on the display after shifting out of reverse. Note: This recall only affects certain vehicles equipped with an 8-inch display.

A rearview camera image that displays when the vehicle is not in reverse may confuse or distract the driver. This could increase the risk of a crash.

Ford will notify owners by mail and send a wireless over-the-air software update for the SYNC module to each vehicle. Alternatively, you may schedule an appointment to have the update performed at a Ford dealership.

On certain vehicles, the windshield may not be properly attached. As a result, the glass can become loose and could separate from the vehicle in a crash.

A windshield that detaches in a crash could create an increased risk of injury.

Ford will notify owners by mail and instruct you to take your vehicle to a dealership to remove and reinstall the windshield. The dealer will also recalibrate the front camera, if necessary.

On certain vehicles, the child safety lock on the right rear door may not work properly. As a result, the door could be opened from the inside of the vehicle when the safety lock is in the "ON" position.

A child safety lock that does not work properly could allow a child to open a rear door while the vehicle is moving, and create a risk of injury.

Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect, and if necessary, replace the rear door latch(es). Ford will also provide you with instructions for how to check the child safety locks before taking your vehicle to the dealership.