Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Ford Ranger model year.
Safety recall notices and repair campaigns registered for the 1998 Ford Ranger in Canada.
On certain vehicles, the speed control deactivation switch may overheat, smoke, or burn, potentially resulting in an underhood fire. The failure mode appears to be different than that of Recall 2005028 (05S28). This time, the concern is with long term durability performance issues causing the switch to fail. Correction: Initially as an interim repair, owners will be instructed to return their vehicles to their dealers to have the speed control deactivation switch disconnected. As soon as replacement parts are available, owners will be instructed to return to the dealers for installation of a fused wiring harness designed to eliminate the potential risk of fire.
A failure of this component (electrical) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain Ranger Electric vehicles, the bolts that attach the transaxle to the vehicle may loosen and the driver may notice a jerking motion and/or a clunking sound. If the vehicle is not serviced promptly. all nine bolts may ultimately fall out or fracture. If this occurs, the transaxle may fall down from its intended location and cause the transaxle to be in a different gear than indicated. If the shifter is in park, the vehicle may still be free to roll as if in neutral. Correction: Transaxle bolts will be replaced with longer bolts equipped with a thread lock material. New bolts will also have a higher installation torque.
A failure of this component (structure) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain Ranger Electric vehicles, the transaxle may have been manufactured with the park detent spring misaligned. If the spring is misaligned, the park mechanism may not engage when the shift lever is placed in the park position. If the park mechanism does not engage and the operator has not applied the parking brake, the vehicle may be free to roll as if in neutral which could potentially result in a vehicle crash. Correction: Transaxles with misaligned park detent springs will be replaced.
A failure of this component (powertrain) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the speed control cable may interfere with the speed control servo pulley and not allow the throttle to return to idle when disengaging the speed control. If the speed control is used and this condition is present, a stuck throttle could result, which could potentially cause an accident. By not using speed control, this condition will not occur. Correction: Vehicles will be inspected and, if required, speed control cable will be replaced.
A failure of this component (engine) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
NOTE: 4X4 VEHICLES WITH OFF ROAD OPTION. THESE VEHICLES DO NOT COMPLY WITH C.M.V.S.S. 120 - TIRE SELECTION AND RIMS FOR VEHICLES OTHER THAN PASSENGER CARS. CERTIFICATION LABELS INCORRECTLY IDENTIFY THE VEHICLE'S WHEEL SIZE AND TYPE AS 15X7.0J RATHER THAN 16X7.0J. CORRECTION: NEW LABELS WILL BE PROVIDED.
A failure of this component (suspension) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
THE FLEXIBLE SECTION OF THE CHASSIS MOUNTED FUEL LINE WHICH CONNECTS TO THE ENGINE MAY COME IN CONTACT WITH THE EXHAUST MANIFOLD. THIS COULD RESULT IN DAMAGE TO THE FUEL LINE AND A POSSIBLE FUEL LEAK. FUEL LEAKAGE IN THE PRESENCE OF AN IGNITION SOURCE COULD RESULT IN A FIRE. CORRECTION: A CLIP WILL BE INSTALLED TO HOLD THE FUEL LINE IN THE INTENDED DESIGN POSITION.
A failure of this component (fuel system) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.