CANADA Transport Canada Safety Recalls
EN FR
auto-recalls.ca

Canadian Safety Recalls Database

Home / Ic Bus / Be School Bus / 2008 Ic Bus Be School Bus
7 Active Safety Recalls

2008 Ic Bus Be School Bus Recall

Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.

7
Safety Recalls
CMVSS
Safety Standard
Transport Canada
Official Source
VIN Decoder

VIN Decoder

Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.

Active Safety 2008 Ic Bus Be School Bus Recalls (7)

Safety recall notices and repair campaigns registered for the 2008 Ic Bus Be School Bus in Canada.

Ref #2015-611 Campaign : 15E-068
2015-12-22 147 units

Accessories

Issue Description

On certain school buses equipped with a Ricon S-Series wheelchair lift, the platform could potentially crack due to bent knuckle link arms and/or defective bearing. Overtime, the platform could separate of the rear portion of the pivot plate making the lift inoperable and putting the lift operator at risk of injury. Correction: Owners will need to make an appointment with the local Ricon Dealer to have the lift inspected and repaired.

Safety Risk

A failure of this component (accessories) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2014-488 Campaign : 14518
2014-10-30 147 units

Accessories

Issue Description

On certain school buses equipped with a Ricon wheelchair lift, the lift platform sides may crack, which could cause the lift to lean against the vehicle door(s) and potentially fall out of the vehicle when the doors are opened, putting the lift operator at risk of injury. Correction: Dealers will inspect lift platforms for cracks and repair as necessary, and install a repair kit.

Safety Risk

A failure of this component (accessories) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2011-304 Campaign : 11518
2011-08-18 2 731 units

Electrical

Issue Description

On certain school buses equipped with a MaxxForce 7 engine, the positive alternator cable may rub against the engine control module mounting bracket. Continued contact could wear through the alternator cable's insulation, which could cause an electrical short circuit. An electrical short could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will inspect the alternator cable for signs of abrasion damage and install tie straps to route the cable away from the engine control module mounting bracket.

Safety Risk

A failure of this component (electrical) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2010-202 Campaign : 10512
2010-06-15 409 units

Powertrain

Issue Description

On certain vehicles equipped with an INTERNATIONAL® VT365 engine, the engine calibration normally responds to a failed open accelerator position sensor circuit fault by returning the engine to low idle speed of 800 rpm and disabling the driver's ability to increase the engine speed. However, If the open circuit condition corrects itself within 30 seconds of its initiation the engine calibration misinterprets this event by going into a "limp home mode" where the engine speed is increased from low idle speed to the high idle speed of 1200 rpm. This increase to high idle speed may occur without warning causing a sudden and unexpected shift in vehicle position possibly resulting in property damage, personal injury or death. Correction: Dealers will install an updated engine calibration.

Safety Risk

A failure of this component (powertrain) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2010-078 Campaign : 10505
2010-03-16 1 253 units

Brakes

Issue Description

On certain vehicles, the parking brake may release if the brake system's electronic control unit misinterprets signals generated from turning the ignition key more than once at a specific rate. The release of the parking brake may cause a sudden, unexpected shift in vehicle position, resulting in property damage, personal injury or death. Correction: Dealers will reprogram brake system electronic control unit.

Safety Risk

A failure of this component (brakes) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2009-038 Campaign : 09501
2009-02-10 4 520 units

Electrical

Issue Description

On certain buses, the heater blower motor located in the entrance door stepwell heater unit as well as the rear wall-mounted heater unit may fail. This could result in elevated temperatures that could ignite nearby combustible materials. A vehicle fire could cause property damage, personal injury or death. Correction: Dealers will affect repairs

Safety Risk

A failure of this component (electrical) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2008-266 Campaign : 08506
2008-07-28 2 576 units

Electrical

Issue Description

Certain buses may exhibit engine hard start, no start, or stall conditions due to possibly damaged terminals in the fuse holder connector of the Injector Drive Module (IDM) clean battery power circuit. These terminals may have been damaged during electrical continuity testing done during the manufacturing process. Loss of vehicle propulsion, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash. Correction: Dealers will affect repairs.

Safety Risk

A failure of this component (electrical) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Vehicle Profile & Safety Standards

Vehicle Specifications & Compliance Benchmark

Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.

Safety Recall Coverage
7 bulletins
Transport Canada safety defect records
Safety Compliance
CMVSS / NSVAC
Motor Vehicle Safety Act standards
NRCan EnerGuide
Trim-Specific
Varies by engine, drive & transmission
VIN Specifications
14 Attributes
Decode exact engine & plant via VIN above

All Ic Bus Be School Bus Model Years

Explore safety recall records by model year.

View Model Overview