Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Ic Bus Ce School Bus model year.
Safety recall notices and repair campaigns registered for the 2012 Ic Bus Ce School Bus in Canada.
On certain school buses, the formed heater hose going to the driver’s heater could rupture allowing hot coolant to leak into the operators foot area. If hot coolant were to come in contact with the operator, it could result in a burn injury and, depending on the driver’s reaction, could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the formed heater hose.
A failure of this component (heater and defroster) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain school buses equipped with a Ricon S-Series wheelchair lift, the platform could potentially crack due to bent knuckle link arms and/or defective bearing. Overtime, the platform could separate of the rear portion of the pivot plate making the lift inoperable and putting the lift operator at risk of injury. Correction: Owners will need to make an appointment with the local Ricon Dealer to have the lift inspected and repaired.
A failure of this component (accessories) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain school buses equipped with a Ricon wheelchair lift, the lift platform sides may crack, which could cause the lift to lean against the vehicle door(s) and potentially fall out of the vehicle when the doors are opened, putting the lift operator at risk of injury. Correction: Dealers will inspect lift platforms for cracks and repair as necessary, and install a repair kit.
A failure of this component (accessories) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain school buses fail to conform to Canada Motor Vehicle Safety Standard 222 – School Bus Passenger Seating and Crash Protection. The seatback material may not meet the leg protection zone impact criteria of the Standard, which could increase the risk of injury during a vehicle crash. Correction: Dealers will install polystyrene blocks in the lower outside corners of each seat (beneath the seat upholstery).
A failure of this component (seats and restraints) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain school buses fail to conform to the requirements of CMVSS 217 – Bus Window Retention, Release and Emergency Exits. Specifically, push-out windows and other emergency exits may only be identified using unilingual text, instead of using text in both official languages. In the event of an emergency, this could hamper passenger efforts to quickly exit the vehicle, which could increase the risk of personal injuries. Correction: Dealers will install updated labels.
A failure of this component (label) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain school buses, some interior panels may not meet the joint strength requirement specified in Canada Motor Vehicle Safety Standard 221 - School Bus Body Joint Strength. In the event of a crash, these panels may separate from the interior compartment structure, which could increase the risk of personal injury to vehicle occupants. Correction: Dealers will inspect and, if necessary, tighten the lower lining joint screws.
A failure of this component (structure) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain school buses fail to comply with the requirements of Canada Motor Vehicle Safety Standard 217 - Bus Window Retention, Release and Emergency Exits. Specifically, the force required to operate the emergency roof hatch may exceed the allowable limit. In the event of an emergency, passengers may not be able to quickly exit the bus, which could increase the risk of personal injuries. Correction: Dealers will install a repair kit to update the roof hatch mechanism.
A failure of this component (other) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain school buses equipped with Bendix ATR-6 Antilock Traction Relay valves, in extremely cold conditions (at or below -18 degrees Celsius), internal ATR valve leakage can occur. This could cause unintended brake application, which could overheat the affected brakes and cause a fire. Also, in certain low traction conditions, unexpected brake application can cause a loss of vehicle control and a crash. These issues could result in property damage and/or personal injury. Correction: Dealers will update the cover assembly on the ATR valves.
A failure of this component (brakes) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain school buses equipped with a MaxxForce 7 engine, the positive alternator cable may rub against the engine control module mounting bracket. Continued contact could wear through the alternator cable's insulation, which could cause an electrical short circuit. An electrical short could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will inspect the alternator cable for signs of abrasion damage and install tie straps to route the cable away from the engine control module mounting bracket.
A failure of this component (electrical) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain school buses equipped with a MaxxForce 7 engine, a cap on the return fuel valve may fall off, allowing air to be drawn into the fuel system. This could result in engine hard start, no start, or stall conditions. Engine stall on the roadway may result in the evacuation and containment of multiple passengers, which could increase the risk of personal injury. In addition, lost vehicle propulsion, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the return fuel valve assembly.
A failure of this component (fuel system) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.