Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Ic Bus Ce School Bus model year.
Safety recall notices and repair campaigns registered for the 2024 Ic Bus Ce School Bus in Canada.
On certain school buses, the air dryer discharge line could become damaged by contact with the passenger-side tire when making a full right turn. If this happens, the parking brake could apply suddenly while driving. Note: This recall only affects certain school buses equipped with air brakes.
A parking brake that self-applies while driving could increase the risk of a crash.
International Motors will notify owners by mail and advise you to take your school bus to a dealership to reroute and secure the air line. If damage is found, the dealer will replace those sections.
On certain school buses, brake fluid may be present in the brake pressure switch and wire harness. As a result, the brake switch could short circuit. Note: This recall is an expansion of recall 23518 (Transport Canada recall no. 2023-322). Certain school buses repaired under that recall require a second repair.
A short circuit can cause wiring to overheat and create the risk of a fire, even while the school bus is parked and turned off.
To reduce the safety risk, International Motors advises that you should park your school bus outdoors and away from other vehicles or structures until the recall repairs have been completed. International Motors will notify owners by mail and advise you to take your school bus to an authorized service facility to replace the brake pressure switch and wire harness.
On certain school buses, the brake caliper mounting bolts may not have been tightened properly. As a result, the bolts could loosen and detach, causing reduced braking. Note: This recall only affects school buses equipped with air brakes.
Reduced braking can cause an extended stopping distance and increase the risk of a crash.
International Motors will notify owners by mail and advise you to take your school bus to a dealership to inspect and, if necessary, replace or tighten the brake caliper bolts.
On certain school buses, the steering gear may not have been assembled correctly. As a result, the steering gear could break and cause a loss of steering.
A loss of steering control could create the risk of a crash.
Navistar will notify owners by mail and instruct you to take your bus to a dealership to inspect the serial number on the steering gear and, if necessary, replace it.
On certain school buses with hydraulic brakes, the brake pressure switch could leak. If this happens, the brake switch could short circuit.
A short circuit can cause wiring to overheat and create the risk of a fire.
Navistar will notify owners by mail and advise you to take your school bus to an authorized service facility to replace the brake pressure switch. If there is brake fluid found on the brake pressure switch connector or fuse, the wire harness will also be replaced.
On certain school buses, the warning light for the antilock brake system (ABS) doesn't stay on when there's a problem with the system, and the vehicle is moving.
A driver that is not warned about a problem with the antilock brake system could have an increased risk of a crash.
Navistar will notify owners by mail and instruct you to take your bus to a dealership to update the brake system electronic control unit software.
On certain school buses, the roof panels may not have been attached correctly. As a result, the bus may not meet Canadian regulations for roof panel joint strength, and the panels could separate in a crash.
A roof panel that separates in a crash could create an increased risk of injury.
Navistar will notify owners by mail and instruct you to take your bus to a dealership to inspect the roof joints, and add screws to the joints if necessary.
On certain school buses, the bolts that attach the torque arm to the rear axle housing may not have been tightened correctly. As a result, the bolts may loosen over time and the rear axle could move from side-to-side. If this happens, there could be a sudden change in vehicle stability.
A sudden change in vehicle stability could cause a loss of control and increase the risk of a crash.
Navistar will notify owners by mail and instruct you to take your bus to a dealership to replace the bolts that attach the transverse torque arm to the rear axle, and tighten them correctly.
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.