Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another International Workstar model year.
Safety recall notices and repair campaigns registered for the 2014 International Workstar in Canada.
On certain vehicles equipped with Navistar engines, the accelerator pedal position sensor could move on its mounting bracket if the pedal is depressed with excessive force. If the sensor stator were to move out of position, it could change the sensor signal output, resulting in a high idle. On vehicles equipped with manual transmissions, if the clutch were to be depressed during operation, the engine could rise to governed RPMs resulting in difficulty selecting gears while shifting. In the condition of a loaded vehicle going down a long grade, the inability to down shift could cause difficulty in maintaining or reducing vehicle speed with just the service brakes, which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will recalibrate the engine Electronic Control Module (ECM) to eliminate the high idle condition.
A failure of this component (engine) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, a double battery (24 volt) jump start or electrical load dump could result in an overvoltage condition of the linear power module (LPM) which is used to control the heater/air conditioning blower motor speed. If this were to occur, this overvoltage condition could lead to the LPM overheating, causing smoke, and increase the risk of fire, which could result in injury and/or damage to property. Correction: Dealers will replace the LPM with an upgraded design.
A failure of this component (electrical) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain vehicles may not comply with the requirements of Canada Motor Vehicle Safety Standard 108 - Lighting System and Retroreflective Devices. Headlight electrical connections may have been reversed at time of assembly, causing reduced headlight photometric output. This could cause the vehicle to fail to comply with the requirements of the standard, decreasing driver visibility and increasing the risk of a crash causing injury and/or property damage. Correction: Dealers will correct the wiring.
A failure of this component (lights and instruments) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles equipped with air disc brakes, the brake caliper bolts may have been insufficiently tightened, or an insufficient number of bolts may have been installed at time of vehicle assembly. Loose or missing bolts could allow a caliper to detach from its mount, resulting in partial loss of brake function, which could increase stopping distance and increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace missing bolts, if any, and tighten all caliper bolts to the specified torque.
A failure of this component (brakes) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.