Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Peterbilt Truck model year.
Safety recall notices and repair campaigns registered for the 1995 Peterbilt Truck in Canada.
DEFECT: DOES NOT COMPLY WITH C.M.V.S.S. 207 - ANCHORAGE OF SEATS THE SEATS HAVE AN IMPROPERLY LOCATED WELD ON A LEVER ARM WHICH SUPPORTS THE SEAT BACK. THIS WELD MAY FAIL UNDER NOMINAL LOADING OF THE SEAT BACK, CAUSING THE SEAT BACK TO FALL BACKWARD FREELY WITHOUT SUPPORT TO THE DRIVER. CORRECTION: WHERE THE SUSPECT WELD IS DEFECTIVE, THE SEAT BACK WILL BE REPLACED.
A failure of this component (seats and restraints) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
DEFECT: THE CASTLE NUTS ON THE BALL STUDS OF THE TIE ROD ENDS MAY NOT BE TIGHTENED TO THE SPECIFIED MINIMUM TORQUE. EXCESSIVELY LOW TORQUE MAY ALLOW MOVEMENT BETWEEN THE BALL STUD AND THE TIE ROD ARM WHICH MAY DAMAGE THESE MATING PARTS AND POTENTIALLY AFFECT THE DRIVER'S ABILITY TO STEER THE VEHICLE RESULTING IN A POSSIBLE CRASH. CORRECTION: AFFECTED TIE ROD END NUTS WILL BE TIGHTENED.
A failure of this component (steering) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
NOTE: VEHICLES EQUIPPED WITH ROCKWELL WABCO SYSTEM SAVER 1000 AIR DRYERS. IN AIR BRAKE SYSTEMS REQUIRING A LARGE VOLUME OF AIR TO PASS THROUGH THE DRYER IN A SHORT PERIOD OF TIME, THE DRYER CANNOT REMOVE ALL OF THE MOISTURE FROM THE AIR. IN A COLD ENVIRONMENT THIS MOISTURE MAY FREEZE AND EFFECTIVELY BLOCK THE AIR LINES DOWNSTREAM OF THE DRYER RESULTING IN AN AIR PRESSURE BUILD UP IN THE DRYER. THIS AIR PRESSURE MAY EVENTUALLY CAUSE THE DRYER CARTRIDGE TO SEPARATE FROM THE DRYER. THE SEPARATED CARTRIDGE MAY CAUSE BODILY INJURY TO ANYONE STANDING NEAR THE DRYER AT THE INSTANT OF SEPARATION. CORRECTION: PRESSURE RELIEF VALVES WILL BE INSTALLED IN THE DRYER OUTLET PORTS ON THE AFFECTED VEHICLES.
A failure of this component (brakes) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.