Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Blue Bird Vision School Bus model year.
Safety recall notices and repair campaigns registered for the 2012 Blue Bird Vision School Bus in Canada.
On certain school buses, the parking brake may not have been adjusted correctly. As a result, the parking brake may not apply enough force to hold the bus when parked. Under certain conditions, like while parked on an incline, this could allow the bus to roll away.
A parked bus that moves unexpectedly could increase the risk injury and/or a crash.
You should park the bus on a level surface and properly chock the wheels until the hand brake assembly has been inspected. Blue Bird will notify owners by mail and instruct you to take your vehicle to an authorized repair facility to have the floor-mounted hand brake assembly inspected and adjusted, as necessary.
On certain school buses equipped with a Ricon wheelchair lift, the lift platform sides may crack, which could cause the lift to lean against the vehicle door(s) and potentially fall out of the vehicle when the doors are opened, putting the lift operator at risk of injury. Correction: Ricon Corporation repair facilities will inspect lift platforms, link arms and bearings for cracks, damage or misalignment and if found to be damaged, link arms and/or platform will be replaced. Note: This recall supersedes recall 2014-360. Vehicles repaired under the previous recall will require re-inspection and potential repair.
A failure of this component (accessories) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain school buses equipped with a Ricon wheelchair lift, the lift platform sides may crack, which could cause the lift to lean against the vehicle door(s) and potentially fall out of the vehicle when the doors are opened, putting the lift operator at risk of injury. Correction: Ricon Corporation repair facilities will inspect lift platforms for cracks and repair as necessary, and install a repair kit. Note: This recall is superseded by recall 2015522. Please see recall 2015522 for more information: Click here for more information
A failure of this component (other) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain propane-powered school buses, the aluminum fuel line fitting at the propane tank can experience dissimilar metal corrosion where it contacts the brass supply housing on the fuel tank. This could result in a propane leak, which in the presence of an ignition source, could result in a fire causing property damage and/or injury. Correction: Dealers will replace the aluminum fuel line fitting at the fuel tank with a new stainless steel fitting.
A failure of this component (fuel system) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain school buses fail to comply with the requirements of Canada Motor Vehicle Safety Standard 217 - Bus Window Retention, Release and Emergency Exits. Specifically, the force required to operate the emergency roof hatch may exceed the allowable limit. In the event of an emergency, passengers may not be able to quickly exit the bus, which could increase the risk of personal injuries. Correction: Dealers will install a repair kit to update the roof hatch mechanism.
A failure of this component (other) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain school buses equipped with a Cummins engine, the V-band clamps used to connect the inlet and outlet cone sections to the Diesel Oxidation Catalyst (DOC) / Diesel Particulate Filter (DPF) include a T-bolt which can fracture and fail when subjected to stress or load. A fracture or failure of the T-bolt may cause the clamp to loosen and the inlet or outlet sections attached to the DOC/DPF housing to disconnect. Should this occur, hot exhaust gases can vent prior to exiting the tailpipe, creating a risk of combustion or damage to adjacent materials, which could result in a vehicle fire. If both clamps fail, the DOC/DPF housing could detach completely, separate from the vehicle, and strike another vehicle, stationary object, or bystander. These issues could result in property damage and/or personal injury. Correction: Cummins will install updated V-band clamps.
A failure of this component (engine) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain school buses equipped with an optional relocated fuel filter (located on the driver's control module), the fuel lines may contact the transmission cover, suffer chafe damage, and develop a fuel leak. Diesel fuel spilt on the roadway could endanger other road users by making the roadway unexpectedly slippery. Correction: Dealers will inspect and, as necessary, reposition or replace the fuel lines.
A failure of this component (fuel system) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain school buses, the sheet metal rain visors over the pushout side window on the left side of the bus may prohibit the emergency exit window from opening sufficiently to meet the requirements of Canada Motor Vehicle Safety Standard 217 - Bus Window Retention, Release and Emergency Exits. In the event of an emergency, passengers may not be able to quickly exit the bus, which could increase the risk of personal injuries. Correction: Dealers will inspect the windows for proper clearance. If a window is found to be contacting the rain visor, sufficient material at the edge of the rain visor will be removed to permit proper clearance. The exposed edge of the rain visor will then be primed and painted.
A failure of this component (other) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.