CANADA Transport Canada Safety Recalls
EN FR
auto-recalls.ca

Canadian Safety Recalls Database

Home / BMW / 3 Series / 2000 BMW 3 Series
8 Active Safety Recalls

2000 BMW 3 Series Recall

Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.

8
Safety Recalls
CMVSS
Safety Standard
Transport Canada
Official Source
VIN Decoder

VIN Decoder

Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.

Active Safety 2000 BMW 3 Series Recalls (8)

Safety recall notices and repair campaigns registered for the 2000 BMW 3 Series in Canada.

Ref #2021-354 Campaign : 32 82 21RC
2021-05-27 346 units

Airbag

Issue Description

This recall is for vehicles that had an inspection performed under recall 2019-599, 2019-600 or 2019-601, but where the airbag inflator was not replaced. This new recall will provide replacement of the airbag inflator. On certain cars, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. In some cases, this could cause an airbag not to fully inflate, while in others it could cause it to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, small pieces of metal could be propelled toward vehicle occupants or cause damage to the airbag and prevent its proper function.

Safety Risk

In a crash requiring an airbag deployment, the driver-front airbag may not inflate properly or the inflator could rupture. This could create a risk of injury.

Corrective Action & Repair

BMW will notify owners by mail and instruct you to take your car to a dealer to replace the driver-front airbag inflator.

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2020-009 Campaign : 72 80 20RC
2020-01-15 20 070 units

Airbag

Issue Description

This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.

Safety Risk

If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.

Corrective Action & Repair

Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the passenger-front airbag module. The passenger-front airbag module will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2019-599 Campaign : 32 85 19RC
2019-11-26 5 459 units

Airbag

Issue Description

On certain cars, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. In some cases, this could cause an airbag not to fully inflate, while in others it could cause it to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, small pieces of metal could be propelled toward vehicle occupants or cause damage to the airbag and prevent its proper function. Note: This recall affects cars built between May 22, 1999 and June 20, 2000. While the car was not built with an affected airbag inflator, it may have had one installed if the steering wheel airbag was replaced.

Safety Risk

In a crash requiring an airbag deployment, the driver-front airbag may not inflate properly or the inflator could rupture. This could create a risk of injury.

Corrective Action & Repair

BMW will notify owners by mail and instruct you to take your car to a dealer to replace the driver-front airbag inflator.

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2019-600 Campaign : 32 86 19RC
2019-11-26 2 757 units

Airbag

Issue Description

On certain cars, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. In some cases, this could cause an airbag not to fully inflate, while in others it could cause it to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, small pieces of metal could be propelled toward vehicle occupants or cause damage to the airbag and prevent its proper function. Note: This recall affects cars built between March 25, 1998 and November 10, 1999.

Safety Risk

In a crash requiring an airbag deployment, the driver-front airbag may not inflate properly or the inflator could rupture. This could create a risk of injury.

Corrective Action & Repair

BMW will notify owners by mail and instruct you to take your car to a dealer to replace the driver-front airbag inflator.

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2019-487 Campaign : 32 83 19RC
2019-10-03 359 units

Airbag

Issue Description

2023 Update - BMW has updated this recall and issued a do not drive advisory for all vehicles that that not yet been repaired. This recall applies to vehicles equipped with a replacement sport steering wheel that has a Takata airbag. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.

Safety Risk

If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.

Corrective Action & Repair

BMW advises not to drive your vehicle unless this recall repair has been completed. BMW will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. The driver-front airbag module or inflator will be replaced as necessary. To learn if your vehicle requires repair, owners may: • Visit https://www.bmw.ca/en/ssl/VehicleRecall.html • Contact your preferred or local BMW Retailer • Call BMW Customer Relations Recall Services at 1-855-217-3002

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2014-299 Campaign : N/D
2014-07-16 40 915 units

Airbag

Issue Description

On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment during a crash where deployment is warranted, increasing the risk of personal injury to the seat occupant. Correction: Dealers will replace the passenger airbag. Note: This is an expansion of recall 2013148.

Safety Risk

A failure of this component (airbag) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2002-215 Campaign : RC2002-215
2002-11-19 1 721 units

Airbag

Issue Description

Certain 323I and 328I vehicles may experience inadvertent or non-crash side impact lateral air bags deployment. In addition, the Battery Safety Terminal (BST) would also activate, disconnecting the starter cable from the battery. In this case, the vehicle electrical systems would continue to operate and the engine would continue to run; however, after the engine is turned off, it could not be restarted. Correction: Dealers will recalibrate the side airbag system in order to reduce the possibility of such non-crash deployments.

Safety Risk

A failure of this component (airbag) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2000-065 Campaign : N/D
2000-03-09 1 132 units

Electrical

Issue Description

On certain 323I, 328I, 528I, 528IT, 540I, 540IT, 740I, 740IL, 750IL and M5 vehicles, the brake light switch capacitor housing may be cracked and in high humidity conditions the capacitor and switch housing could become overheated and deformed. As a result, a short circuit or an open circuit could occur in the switch. This could cause the switch to remain either in the "brake lamps off" position or the "brake lamps on" position. If the switch remains in the "off" position, the brake lamps will be rendered inoperative. Conversely, if the switch remains in the "on" position, the brake lamps will be continuously illuminated when the ignition switch is in the "on" position. Correction: Brake lamp switch will be replaced with an improved switch.

Safety Risk

A failure of this component (electrical) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Vehicle Profile & Safety Standards

Vehicle Specifications & Compliance Benchmark

Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.

Safety Recall Coverage
8 bulletins
Transport Canada safety defect records
Safety Compliance
CMVSS / NSVAC
Motor Vehicle Safety Act standards
NRCan EnerGuide
Trim-Specific
Varies by engine, drive & transmission
VIN Specifications
14 Attributes
Decode exact engine & plant via VIN above

All BMW 3 Series Model Years

Explore safety recall records by model year.

View Model Overview