Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Ford Crown Victoria model year.
Safety recall notices and repair campaigns registered for the 1991 Ford Crown Victoria in Canada.
Note: 1996-99 crown victoria police, fleet and ngv and lincoln town car limousine equipped with a lower control arm ball joint containing a one piece bearing and 1990-96 crown victoria police, fleet and ngv and lincoln town car limousine that were serviced with either a ball joint containing an one piece bearing or a front lower control arm with a one piece bearing. High bearing loads can lead to thinning and eventual cracking of the lower control arm ball joint. This can result in separation of the ball and cap of the joint. Should this occur, the control arm to which the cap is mounted will drop to the ground. Should this occur while the vehicle is moving, reduced steering control could result in a collision. Correction: Lower control arm ball joints will be replaced.
A failure of this component (suspension) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
ON VEHICLES EQUIPPED WITH POLICE OPTION AND 5.8 LITRE ENGINES, THE REAR BRAKE TUBE COULD ABRADE AGAINST THE VEHICLE'S UNDERBODY. THIS COULD RESULT IN A FLUID LEAK AND LOSS OF REAR BRAKES CAUSING A REDUCTION OF BRAKE PERFORMANCE AND INCREASED STOPPING DISTANCES. CORRECTION: A SERVICE REPAIR WILL BE PERFORMED ON ANY BRAKE LINES THAT HAVE AN INDICATION OF CONTACT OR HAVE THE POTENTIAL FOR CONTACT WITH THE UNDERBODY.
A failure of this component (brakes) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
THE AUTOMATIC OVERDRIVE TRANSMISSIONS ON THESE VEHICLES MAY BE EQUIPPED WITH A PARK ROD ASSEMBLY THAT INCLUDES A PARK CAM WITH INADEQUATE SURFACE HARDNESS. THIS COULD RESULT IN HIGH PARK DISENGAGEMENT FORCES OR IN NO PARK ENGAGEMENT WHEN THE SHIFT LEVER IS PLACED IN THE PARK POSITION. THIS IN TURN COULD RESULT IN AN UNPOWERED VEHICLE ROLL-AWAY IF THE VEHICLE IS PARKED ON AN INCLINE WITH THE PARKING BRAKE OFF. CORRECTION: PARK ROD ASSEMBLY WILL BE REPLACED ON AFFECTED VEHICLES.
A failure of this component (powertrain) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
ON VEHICLES EQUIPPED WITH A DRIVER SIDE SUPPLEMENTAL AIR BAG, THE CENTRE POST THREADS OF THE AIR BAG MODULE MAY HAVE BEEN DAMAGED DURING ASSEMBLY. IN A DEPLOYMENT LEVEL COLLISION, THE CENTRE POST HOUSING MAY SEPARATE FROM THE AIR BAG ADAPTER CAUSING THE AIR BAG NOT TO INFLATE PROPERLY. IN ADDITION, HOT COMBUSTION GASES WOULD FLOW DIRECTLY THROUGH THE AIR BAG RATHER THAN THROUGH THE NORMAL FILTERING AND COOLING DEVICES, PRESENTING THE POSSIBILITY OF BURN INJURY TO VEHICLE OCCUPANTS. CORRECTION: AIR BAG MODULES WILL BE INSPECTED AND REPLACED IF NECESSARY.
A failure of this component (seats and restraints) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.