Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Ford Explorer model year.
Safety recall notices and repair campaigns registered for the 1995 Ford Explorer in Canada.
On certain vehicles, the speed control deactivation switch may overheat, smoke, or burn, potentially resulting in an underhood fire. The condition may occur either when the vehicle is parked or when it is in operation. Correction: Dealers will install a new switch or fused wiring harness. Note: This is an expansion of recall 2005028 (05S28) for vehicles not previously included in the campaign.
A failure of this component (other) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the front stabilizer bar link stud can fracture from bending fatigue. This can result in increased vehicle lean or the driver may sense a feeling of looseness in the steering. Above 80 km/h drivers may experience vehicle wander or sway. Correction: Dealers will install 10mm front left and right stabilizer bar links.
A failure of this component (suspension) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain vehicles, the hydraulic lift cylinders are attached to brackets that are welded to the liftgate. under certain conditions, the bracket welds may fracture due to the brackets being inadvertently mislocated relative to the liftgate. There may be a potential for the liftgate bracket to gradually bend inward which might allow the liftgate cylinder ball stud to disengage. Correction: Reinforcement brackets will be installed.
A failure of this component (structure) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
THESE VEHICLES DO NOT COMPLY WITH C.M.V.S.S. 105 - HYDRAULIC BRAKE SYSTEMS. THE BRAKE TUBES FROM THE BRAKE MASTER CYLINDER TO THE HYDRAULIC CONTROL UNIT MAY NOT BE ROUTED CORRECTLY. CORRECTION: NEW BRAKE TUBES WILL BE INSTALLED AND, IF NECESSARY, A NEW MASTER CYLINDER WILL BE INSTALLED.
A failure of this component (brakes) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
THE INNER TIE ROD ON THESE VEHICLES MAY FRACTURE. IF THE TIE ROD FRACTURES, STEERING CONTROL COULD BE ADVERSELY AFFECTED RESULTING IN A POSSIBLE CRASH. CORRECTION: VEHICLES WILL BE INSPECTED AND INNER TIE RODS WILL BE REPLACED IF NECESSARY.
A failure of this component (steering) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
THE PASSENGER SIDE SUPPLEMENTAL RESTRAINT SYSTEM (AIR BAG) MAY HAVE A CRACKED INFLATOR BODY. IF THE VEHICLE IS INVOLVED IN A DEPLOYMENT LEVEL CRASH, THE PASSENGER SIDE AIR BAG MAY NOT INFLATE PROPERLY WHICH COULD RESULT IN REDUCED OCCUPANT PROTECTION. IN ADDITION, THE IGNITER PLUG COULD SEPARATE FROM THE INFLATOR, WHICH COULD RESULT IN THE RELEASE OF HOT GASES AND COULD IGNITE FLAMMABLE MATERIAL OR POTENTIALLY CAUSE PERSONAL INJURY. CORRECTION: VEHICLES WILL BE INSPECTED AND A NEW PASSENGER SIDE AIR BAG MODULE WILL BE INSTALLED IF NECESSARY.
A failure of this component (seats and restraints) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.