Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Freightliner Business Class M2 model year.
Safety recall notices and repair campaigns registered for the 2020 Freightliner Business Class M2 in Canada.
On certain trucks, the spline teeth in the windshield wiper arm(s) could wear and break. If this happens, the windshield wipers may not work properly. Note: This is an expansion of recall FL-926 (Transport Canada Recall 2022-172).
Windshield wipers that don't work could affect a driver's visibility and increase the risk of a crash.
Daimler Truck North America (DTNA) will notify the owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect, and if necessary, replace the windshield wiper arm(s).
On certain trucks, the joint connecting the steering arm to the drag link may not have been properly tightened. As a result, the joint could loosen and separate, causing a loss of steering control.
A loss of steering control could create the risk of a crash.
Daimler Truck North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect the castle nut on the drag link taper joint. The nut will be checked for the correct torque, and tightened or repaired, as necessary.
Certain trucks were built with tires that are not approved for use with the truck's wheels. As a result, the tires may not perform properly, or a tire could fail.
A tire failure could cause a loss of control and increase the risk of a crash.
Daimler Truck North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to replace the affected tires.
Certain trucks were built with tires that are not approved for use with the truck's wheels. As a result, the tires may not perform properly, or a tire could fail.
A tire failure could cause a loss of control and increase the risk of a crash.
Daimler Trucks North America (DTNA) will notify owners by mail. The corrective actions for this recall are under development. You will be instructed to bring your truck to a DTNA authorized service facility when a repair is available.
On certain vehicles, the fuel rail assembly could develop a leak. Note: This recall only affects vehicles equipped with a Cummins L9 or ISX12 diesel engine.
A fuel leak can create the risk of a fire.
Cummins will notify owners by mail and instruct you to take your vehicle to a Cummins authorized service center to inspect the fuel rail. If damage is found, the fuel rail and fuel lines will be replaced. If no damage is found, the fuel rail will be reassembled with new crush washers using a special tool.
On certain trucks, the engine wire harness could be damaged by contact with various locations around the air compressor and the frame rail. If this happens, the engine could stall and you may not be able to restart it. Note: This recall only affects trucks built with a Detroit DD8 engine.
A sudden loss of engine power could increase the risk of a crash.
Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect the clearance between the wire harness and engine, and to check for any damage to the wiring. If the wire harness is damaged, it will be replaced with a new harness that has a severe duty wrap and additional hardware for routing.
On certain trucks, the engine wire harness could be damaged by contact with various locations around the air compressor and the frame rail. If this happens, the engine could stall and you may not be able to restart it. Note: This recall only affects trucks built with a Detroit DD5 engine.
A sudden loss of engine power could increase the risk of a crash.
Daimler Trucks North America (DTNA) will notify owners by mail and instruct you to take your truck to a DTNA authorized service facility to inspect the clearance between the wire harness and engine, and to check for any damage to the wiring. If the wire harness is damaged, it will be replaced with a new harness that has a severe duty wrap and additional hardware for routing.
On certain trucks equipped with "Fleet Engineer" mud flaps, the bracket for the mud flaps may partially cover the rear reflective tape. Canadian regulations require that reflective tape must be visible on the rear of the truck.
Reflective tape that is covered may make the truck less visible to others and could create an increased risk of a crash.
Daimler Trucks of North America (DTNA) will notify owners by mail and instruct you to take your truck to an authorized DTNA Service Facility to inspect the reflective tape. It will be moved as necessary to meet the regulations.
On certain trucks equipped with air disc brakes, the brake caliper mounting bolts may not be properly tightened. This could cause the caliper bolts to loosen and result in reduced brake effectiveness.
Reduced brake effectiveness could cause an increase in stopping distance and create the risk of a crash.
The company will notify owners by mail and instruct them to take their truck to an authorized Daimler Trucks of North America Service Facility to inspect and replace the brake caliper bolts as necessary.
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.