Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.
Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.
Switch to another Micro Bird G5 School Bus model year.
Safety recall notices and repair campaigns registered for the 2011 Micro Bird G5 School Bus in Canada.
On certain school buses, the anchor screw caps for the wheelchair restraint system may not have been installed properly. As a result, the tie-downs may not lock correctly and could detach in a crash. Note: This recall only affects certain school buses equipped with a Q'Straint Slide N' Click wheelchair restraint system.
Tie-downs that detach in a crash could increase the risk of injury.
Micro Bird will notify owners by mail and provide you with instructions for how to inspect and, if necessary, secure the anchor screw caps for the wheelchair restraint system. Alternatively, you may schedule an appointment to have the repairs performed at a Micro Bird dealership.
On certain school buses, the exterior handle for the rear emergency door may not be strong enough. As a result, the handle could break and cause the emergency door not to be able to be opened from the outside.
A door that can't be opened could slow your exit from the bus in an emergency. This could also delay emergency responders from entering the bus. Both issues could increase the risk of injury.
Micro Bird will notify owners by mail and advise you to take your school bus to a dealership to replace the rear emergency door exterior handle.
On certain school buses, an unused wiring harness located in the B-pillar area could become damaged. If this happens, the wires could short circuit. Note: This recall only affects school buses built on a General Motors chassis.
A short circuit could create the risk of a fire.
Micro Bird will notify owners by mail and provide you with instructions for how to inspect the wiring and correct this problem.
On certain school buses, the service door may not be adjusted correctly. As a result, the door panels may get stuck when the emergency release handle is used, or may not open when force is applied to the door. Additionally, the exterior emergency release handle may not allow the service door to be opened from outside of the bus.
A door that cannot be opened could delay exiting the bus in an emergency. This could also delay emergency response. Both of these issues could increase the risk of injury.
Micro Bird will notify owners by mail and instruct you to take your bus to a dealer to adjust the service door. Alternatively, Micro Bird will provide owners instructions on how to correctly adjust the service door.
Certain school buses may fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 222 - School Bus Passenger Seating and Crash Protection. The thickness of the foam in the knee impact area of the lower seatback is insufficient, which could increase the risk of injury in a crash. Correction: Dealers will modify the seat to meet the requirements of the standard.
A failure of this component (seats and restraints) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Certain school buses built on a Ford or GM chassis may fail to comply with the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 220 – Rollover Protection. The downward vertical movement of the roof structure of the vehicle may be higher than the requirements of the standard, increasing the risk of injury in the event of a rollover. Correction: Dealers will add a reinforcement plate to the front structure to meet the requirements of the standard.
A failure of this component (structure) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain school buses equipped with a Ricon wheelchair lift, the lift platform sides may crack, which could cause the lift to lean against the vehicle door(s) and potentially fall out of the vehicle when the doors are opened, putting the lift operator at risk of injury. Correction: Owners will be provided with inspection and repair instructions, as well as necessary repair parts.
A failure of this component (accessories) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain school buses equipped with a Ricon wheelchair lift, the lift platform sides may crack, which could cause the lift to lean against the vehicle door(s) and potentially fall out of the vehicle when the doors are opened, putting the lift operator at risk of injury. Correction: Ricon Corporation repair facilities will inspect lift platforms for cracks and repair as necessary, and install a repair kit.
A failure of this component (other) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain school buses equipped with a Braun wheelchair lift, over time and with frequent use, the roll stop latches on the outer barrier may become bent or misaligned. As a result, a wheelchair occupant may defeat or ride over the insufficiently latched roll stop. If this occurs when the lift platform is in an elevated position, the user could fall and sustain injury. Correction: Authorized Braun service facilities will replace the outer barrier latch, bracket and clevis pin.
A failure of this component (accessories) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain school buses, a joint in the ceiling sheet metal fails to conform to the requirements of Canada Motor Vehicle Safety Standard 221 - School Bus Body Joint Strength. The size of the hemming and the location of the glue have altered the joint strength of the panels. In the event of a crash, the ceiling panel may separate from the vehicle structure, which could increase the risk of personal injury to vehicle occupants. Correction: Dealers will install a junction plate over the ceiling panel joint.
A failure of this component (structure) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain school buses, the wiring harness for the flashing lights (used while passengers are boarding or leaving the vehicle) may be undersized and could fail. Failure of the lights to illuminate would render a stopped bus less visible to other road users, which could increase the risk of a child or pedestrian being struck by a passing motorist, causing personal injury or death. Correction: Dealers will add a 14-gauge wiring harness and relay between the switch and control board.
A failure of this component (electrical) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
On certain school buses, the wiring harness (located behind the driver's seat) may chafe against a moulding and become damaged. An electrical short could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will modify the floor section and re-secure the wiring harness.
A failure of this component (electrical) may increase the risk of a crash or injury.
Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).
Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.
Explore safety recall records by model year.