CANADA Transport Canada Safety Recalls
EN FR
auto-recalls.ca

Canadian Safety Recalls Database

Home / Peterbilt / 365 / 2017 Peterbilt 365
5 Active Safety Recalls

2017 Peterbilt 365 Recall

Safety defect investigations, technical specifications, and manufacturer repair notices for Canadian owners.

5
Safety Recalls
CMVSS
Safety Standard
Transport Canada
Official Source
VIN Decoder

VIN Decoder

Enter a VIN to identify your vehicle and find Canadian recall notices that may apply to its make, model and year. Confirm VIN-specific eligibility and repair status with the manufacturer.

Active Safety 2017 Peterbilt 365 Recalls (5)

Safety recall notices and repair campaigns registered for the 2017 Peterbilt 365 in Canada.

Ref #2020-148 Campaign : 20PBC / 20KWB
2020-04-07 65 284 units

Lights And Instruments

Issue Description

On certain trucks, the warning light for the tractor anti-lock brake system (ABS) may not turn on if the system loses power. If this happens, the driver will not get warning that the ABS is not working properly. Note: This problem would also cause the traction control (TC) and electronic stability control (ESC) lights not to turn on.

Safety Risk

If a driver is not warned that the ABS is not working properly, there could be an increased risk of a crash.

Corrective Action & Repair

PACCAR will notify owners by mail and instruct you to take your truck to a dealer to update the software for the cab control module (CECU).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2020-090 Campaign : 20PBA
2020-03-05 2 435 units

Electrical

Issue Description

On certain trucks, the battery cables to the jump-start terminal may be too long. As a result, the cables could contact and chafe against the left-front suspension leaf spring. If this happens, a short circuit could occur and cause the positive cable to overheat or melt. Note: This recall only affects trucks with a left-hand under-hood battery jumper terminal.

Safety Risk

An overheated or melted battery cable could create the risk of a fire.

Corrective Action & Repair

The company will notify owners by mail and instruct you to take your truck to a dealer for an inspection of the jump-start terminal cables. If the cables are too long, they will be replaced.

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2018-389 Campaign : 18KWD / 18PBB
2018-07-24 214 units

Brakes

Issue Description

Certain vehicles may fail to conform to the requirements of Canada Motor Vehicle Safety Standard (CMVSS) 121 - Air Brake Systems and CMVSS 136 - Electronic Stability Control Systems for Heavy Vehicles. In the event that the anti-lock brake system (ABS) loses battery and/or ignition power to the controller, the ABS indicator lamp may not illuminate to warn the driver of the loss of ABS, which is contrary to the requirements of the standards. This could result in the loss of ABS function with no warning to the driver, which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will reprogram the cab control module.

Safety Risk

A failure of this component (brakes) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2016-603 Campaign : 816-F
2016-12-02 184 units

Brakes

Issue Description

On certain vehicles, the stop lamps may fail to activate due to a defective weld and incomplete circuit within the stop lamp switch. If the stop lamp switch fails during the application of the service brakes, the brake lights on the vehicle and trailer will not illuminate, thereby increasing the possibility of a crash causing injury and/or damage to property. Correction: Dealers will inspect and replace any 08-01760 stop lamp switches with a suspect date code (1056, 1026, 0821, 1386 and 1456).

Safety Risk

A failure of this component (brakes) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Ref #2016-289 Campaign : 16KWB / 616-C
2016-06-08 178 units

Engine

Issue Description

On certain vehicles, the Engine Control Module (ECM) may develop an internal electrical short circuit that could blow a fuse in the ECM's electrical supply circuit. This could cause the engine to stall without warning and prevent the vehicle from being restarted. Engine stalling without warning would result in lost propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the ECM.

Safety Risk

A failure of this component (engine) may increase the risk of a crash or injury.

Corrective Action & Repair

Authorized dealerships will inspect the vehicle and complete all necessary repairs free of charge (parts and labor).

Free parts & labor under Motor Vehicle Safety Act Transport Canada Open Data
Vehicle Profile & Safety Standards

Vehicle Specifications & Compliance Benchmark

Official Transport Canada safety campaigns, Canadian motor vehicle safety compliance standards and live VIN specifications.

Safety Recall Coverage
5 bulletins
Transport Canada safety defect records
Safety Compliance
CMVSS / NSVAC
Motor Vehicle Safety Act standards
NRCan EnerGuide
Trim-Specific
Varies by engine, drive & transmission
VIN Specifications
14 Attributes
Decode exact engine & plant via VIN above

All Peterbilt 365 Model Years

Explore safety recall records by model year.

View Model Overview